# Usermods

**URL:** https://wled.discourse.group/c/usermods/11.md

[Latest](https://wled.discourse.group/latest.md) · [Categories](https://wled.discourse.group/categories.md)

---

## [About the Usermods category](https://wled.discourse.group/t/about-the-usermods-category/105)

<div class="topic-metadata">

**Author:** [@Aircoookie](https://wled.discourse.group/u/Aircoookie)\
**Replies:** 0

</div>

Post usermod requests, or ask for help regarding usage or development of your own mod!

---

## [ESP32 DHT22 Usermod with WLED \>15.3](https://wled.discourse.group/t/esp32-dht22-usermod-with-wled-15-3/15544)

<div class="topic-metadata">

**Author:** [@volleybus](https://wled.discourse.group/u/volleybus)\
**Replies:** 1\
**Last updated:** [October 11, 2026, 2:35pm UTC](https://wled.discourse.group/t/esp32-dht22-usermod-with-wled-15-3/15544 "2026-10-11T14:35:54Z")

</div>

Hi all, I have been using a DHT22 module with WLED 15.3 custom build. However when I try the same build flags on anything \>15.3, I can not get the DHT module to initialize properly and after the first readout timer runs …

---

## [Can't get motion\_reactive working](https://wled.discourse.group/t/cant-get-motion-reactive-working/15447)

<div class="topic-metadata">

**Author:** [@SeanRiddle](https://wled.discourse.group/u/SeanRiddle)\
**Replies:** 1\
**Last updated:** [September 22, 2026, 6:24am UTC](https://wled.discourse.group/t/cant-get-motion-reactive-working/15447 "2026-09-22T06:24:08Z")

</div>

Hello. I am very new to WLED but have done some embedded development in the past. I’m wanting to add motion effects to a project, and found the motion\_reactive usermod. I installed Visual Studio Code, Platform.io, etc…

---

## [Waveshare ESP32-S3-RGB-Matrix Audioreactive Usermod](https://wled.discourse.group/t/waveshare-esp32-s3-rgb-matrix-audioreactive-usermod/15498)

<div class="topic-metadata">

**Author:** [@phill104](https://wled.discourse.group/u/phill104)\
**Replies:** 2\
**Last updated:** [September 2, 2026, 8:05pm UTC](https://wled.discourse.group/t/waveshare-esp32-s3-rgb-matrix-audioreactive-usermod/15498 "2026-09-02T20:05:58Z")

</div>

I’ve built but not been able to test (as my board got damaged by children) a usermod to bring up the ES7210 Mic on I2c and stream to I2S. I am a new user here so cannot upload yet so I have created all the details and fi…

---

## [ESP-NOW on WT32-ETH01](https://wled.discourse.group/t/esp-now-on-wt32-eth01/15259)

<div class="topic-metadata">

**Author:** [@le-krabbypatty](https://wled.discourse.group/u/le-krabbypatty)\
**Replies:** 3\
**Last updated:** [August 9, 2026, 1:12pm UTC](https://wled.discourse.group/t/esp-now-on-wt32-eth01/15259 "2026-08-09T13:12:52Z")

</div>

I have been trying to set up a WT32-ETH01 using ESP-NOW and I can figure it out for the life of me. I want to have the WT32-ETH01 connected to my LAN line and then that become a master to other slave nodes using ESP-NOW.…

---

## [Custom CSS for The\_Monster](https://wled.discourse.group/t/custom-css-for-the-monster/15472)

<div class="topic-metadata">

**Author:** [@SEKiller007](https://wled.discourse.group/u/SEKiller007)\
**Replies:** 3\
**Last updated:** [July 31, 2026, 10:40am UTC](https://wled.discourse.group/t/custom-css-for-the-monster/15472 "2026-07-31T10:40:52Z")

</div>

Будет удалено: Aug 09, 2026 03:27

---

## [Midi live performance usermod](https://wled.discourse.group/t/midi-live-performance-usermod/14472)

<div class="topic-metadata">

**Author:** [@frankofino](https://wled.discourse.group/u/frankofino)\
**Replies:** 3\
**Last updated:** [July 17, 2026, 4:37pm UTC](https://wled.discourse.group/t/midi-live-performance-usermod/14472 "2026-07-17T16:37:05Z")

</div>

Hi I am frankofino and new in this forum. We are looking for help with our WLED Projekt. We built a led matrix and intend to use it live as a Performance Objekt. So the app with its sliders and buttons to select and c…

---

## [Police style pattern](https://wled.discourse.group/t/police-style-pattern/15445)

<div class="topic-metadata">

**Author:** [@JonCherba](https://wled.discourse.group/u/JonCherba)\
**Replies:** 3\
**Last updated:** [July 3, 2026, 12:39pm UTC](https://wled.discourse.group/t/police-style-pattern/15445 "2026-07-03T12:39:59Z")

</div>

I’m trying to make a custom mod to blink every other led red, then blue and the remaining leds do the opposite. fairly fast blink rate. a random led should flash bright white randomly. i have 4 drone arms with 5 leds eac…

---

## [Temperature Usermod lost](https://wled.discourse.group/t/temperature-usermod-lost/15253)

<div class="topic-metadata">

**Author:** [@hg6806](https://wled.discourse.group/u/hg6806)\
**Replies:** 3\
**Last updated:** [April 21, 2026, 2:33pm UTC](https://wled.discourse.group/t/temperature-usermod-lost/15253 "2026-04-21T14:33:11Z")

</div>

Hi there, At an ESP8266, I had a WLED with usermod (temperature) to read a dallas DS18B20 sensor. Now, after 2 years, I did an update by load a regular WLED\_0.15.4\_ESP8266.bin file into it. Now, I can’t set the temper…

---

## [Force config save](https://wled.discourse.group/t/force-config-save/15160)

<div class="topic-metadata">

**Author:** [@peplinskijohn](https://wled.discourse.group/u/peplinskijohn)\
**Replies:** 3\
**Last updated:** [January 31, 2026, 6:18pm UTC](https://wled.discourse.group/t/force-config-save/15160 "2026-01-31T18:18:50Z")

</div>

Is it possible to trigger a cfg.json save without using the UI? I’m attempting to have three dynamic variables persist between boots. I’ve used readFromConfig() and addToConfig() but my understanding is that this is no…

---

## [Need guidance creating new usermod\_v2](https://wled.discourse.group/t/need-guidance-creating-new-usermod-v2/15109)

<div class="topic-metadata">

**Author:** [@peplinskijohn](https://wled.discourse.group/u/peplinskijohn)\
**Replies:** 1\
**Last updated:** [January 4, 2026, 11:39am UTC](https://wled.discourse.group/t/need-guidance-creating-new-usermod-v2/15109 "2026-01-04T11:39:18Z")

</div>

I’m looking at: usermods/EXAMPLE/usermod\_v2\_example.cpp: It mentions putting usermod in sketch folder under wled00. Is this usermod.cpp? It mentions registering in usermods\_list.cpp but I do not see this file in 0.15.…

---

## [I2S as Slave](https://wled.discourse.group/t/i2s-as-slave/13893)

<div class="topic-metadata">

**Author:** [@madmax177](https://wled.discourse.group/u/madmax177)\
**Replies:** 1\
**Last updated:** [December 27, 2025, 2:45am UTC](https://wled.discourse.group/t/i2s-as-slave/13893 "2025-12-27T02:45:05Z")

</div>

I am using the Dayton Audio KABD-4100 amp in a project that happens to have an I2S output (master) and I am trying to connect an esp-32 for audio light effects. I understand that the I2S interface in WLED is running as a…

---

## [Usermods in new code](https://wled.discourse.group/t/usermods-in-new-code/15049)

<div class="topic-metadata">

**Author:** [@prschguy](https://wled.discourse.group/u/prschguy)\
**Replies:** 2\
**Last updated:** [December 10, 2025, 7:52am UTC](https://wled.discourse.group/t/usermods-in-new-code/15049 "2025-12-10T07:52:10Z")

</div>

Wanted to see if anyone can explain how usermods work in the new codebase. I have been away from the code for about a year, and it seems many things have changed. I am specifically trying to get 4 line display, and rotar…

---

## [Quinled Digiquad V2.r7 and Onboard Temp Sensor](https://wled.discourse.group/t/quinled-digiquad-v2-r7-and-onboard-temp-sensor/5035)

<div class="topic-metadata">

**Author:** [@renegade66](https://wled.discourse.group/u/renegade66)\
**Replies:** 11\
**Last updated:** [December 7, 2025, 1:32pm UTC](https://wled.discourse.group/t/quinled-digiquad-v2-r7-and-onboard-temp-sensor/5035 "2025-12-07T13:32:37Z")

</div>

I have two quinled quad boards and have tried to get the temp sensor to read on them with the following setups: 2 different Quinled ESP32’s with the antenna connector 2 different Quinled ESP32 ABE’s with the netw…

---

## [Animated staircase -- question -- pls help](https://wled.discourse.group/t/animated-staircase-question-pls-help/14873)

<div class="topic-metadata">

**Author:** [@Glitch](https://wled.discourse.group/u/Glitch)\
**Replies:** 0\
**Last updated:** [September 26, 2025, 11:57am UTC](https://wled.discourse.group/t/animated-staircase-question-pls-help/14873 "2025-09-26T11:57:32Z")

</div>

Dear All, I have a guestion in regards of this usermod: in the manual i see: “Always switch on when one of the sensors detects movement, even if an effect is still running. It can gracefully handle multiple people on th…

---

## [Switching WiFi on/off with Pushbutton](https://wled.discourse.group/t/switching-wifi-on-off-with-pushbutton/14871)

<div class="topic-metadata">

**Author:** [@H4NNE5](https://wled.discourse.group/u/H4NNE5)\
**Replies:** 0\
**Last updated:** [September 25, 2025, 8:21pm UTC](https://wled.discourse.group/t/switching-wifi-on-off-with-pushbutton/14871 "2025-09-25T20:21:22Z")

</div>

Hi, For a battery operated system with WLED, I want to disable the WiFi module with a physical pushbutton.I have set up a usermod and am now facing the problem with my code, that apparently the Wifi is never disabled.I …

---

## [Combining Touch Control with ArtNet in WLED via Usermod – Is This Possible?](https://wled.discourse.group/t/combining-touch-control-with-artnet-in-wled-via-usermod-is-this-possible/14636)

<div class="topic-metadata">

**Author:** [@justrobbi](https://wled.discourse.group/u/justrobbi)\
**Replies:** 0\
**Last updated:** [July 8, 2025, 4:24pm UTC](https://wled.discourse.group/t/combining-touch-control-with-artnet-in-wled-via-usermod-is-this-possible/14636 "2025-07-08T16:24:55Z")

</div>

Hi everyone, I’m currently working on a project involving a light staff (think of a glowing LED stick used on a stage or during a performance), and I’m exploring how I can control it using both WLED and external ArtNet …

---

## [Wipe & sweep ceiling LEDs strip light](https://wled.discourse.group/t/wipe-sweep-ceiling-leds-strip-light/5627)

<div class="topic-metadata">

**Author:** [@Cubano\_cu](https://wled.discourse.group/u/Cubano_cu)\
**Replies:** 17\
**Last updated:** [June 16, 2025, 6:22am UTC](https://wled.discourse.group/t/wipe-sweep-ceiling-leds-strip-light/5627 "2025-06-16T06:22:34Z")

</div>

Hello, I would like someone to help me creating a mod that allows me to use wipe and sweep to turn on the ceiling lights in my house. When activating a switch on the wall, the lights turn on with the wipe or sweep effec…

---

## [Fseq play on wled](https://wled.discourse.group/t/fseq-play-on-wled/14548)

<div class="topic-metadata">

**Author:** [@dedi8679](https://wled.discourse.group/u/dedi8679)\
**Replies:** 0\
**Last updated:** [June 4, 2025, 9:13am UTC](https://wled.discourse.group/t/fseq-play-on-wled/14548 "2025-06-04T09:13:45Z")

</div>

Hello Evreyone i try to upload fseq file from xlights into wled preset (i use 0.16 version) by use the sequence {“fseq”:“/testxlights.fseq”} but nothing seems to happend (of course i upload the file first to wled/edit …

---

## [Turn Signals - Multiple switch inputs solved!](https://wled.discourse.group/t/turn-signals-multiple-switch-inputs-solved/3302)

<div class="topic-metadata">

**Author:** [@Aa7bq](https://wled.discourse.group/u/Aa7bq)\
**Replies:** 55\
**Last updated:** [June 2, 2025, 4:30pm UTC](https://wled.discourse.group/t/turn-signals-multiple-switch-inputs-solved/3302 "2025-06-02T16:30:45Z")

</div>

I’ve just completed a usermod that provides for binary encoded input and thought that I’d share the idea here. If it’s good enough, I’ll submit it to Github as a regular usermod. Use case: This project adds fancy turn…

---

## [Compiling with usermod only works now and then](https://wled.discourse.group/t/compiling-with-usermod-only-works-now-and-then/14503)

<div class="topic-metadata">

**Author:** [@wrdvdb](https://wled.discourse.group/u/wrdvdb)\
**Replies:** 2\
**Last updated:** [May 23, 2025, 9:52pm UTC](https://wled.discourse.group/t/compiling-with-usermod-only-works-now-and-then/14503 "2025-05-23T21:52:51Z")

</div>

I am building a usermod but I’m having trouble building it. (vscode platformio using version 0.16-alpha, because the usermod system looks nicer than before) I got it to work, the config page is showing correctly and the…

---

## [RF433 usermod wont accept new rf433 commands](https://wled.discourse.group/t/rf433-usermod-wont-accept-new-rf433-commands/14493)

<div class="topic-metadata">

**Author:** [@rxtx2](https://wled.discourse.group/u/rxtx2)\
**Replies:** 0\
**Last updated:** [May 18, 2025, 6:08pm UTC](https://wled.discourse.group/t/rf433-usermod-wont-accept-new-rf433-commands/14493 "2025-05-18T18:08:58Z")

</div>

I sucessfull build usermod\_v2\_RF433. The rf433 codes from my remote are also displayed correct in the info page. But if i setup remote433.json, it only accept one command from my rf433. After that it do not detect any…

---

## [Assistance with Usermod\_four\_line\_display Supported Displays?](https://wled.discourse.group/t/assistance-with-usermod-four-line-display-supported-displays/12807)

<div class="topic-metadata">

**Author:** [@Daro66](https://wled.discourse.group/u/Daro66)\
**Replies:** 13\
**Last updated:** [May 7, 2025, 12:31pm UTC](https://wled.discourse.group/t/assistance-with-usermod-four-line-display-supported-displays/12807 "2025-05-07T12:31:45Z")

</div>

HI. I have a question about this mod’s compatible hardware. The UI offers a few different display types, but only SPI pins are offered up in the UI. So, no I2C displays seem to be supported, but according to usermod\_v2\_…

---

## [Should I try to use Bluetooth in a WLED usermod?](https://wled.discourse.group/t/should-i-try-to-use-bluetooth-in-a-wled-usermod/14386)

<div class="topic-metadata">

**Author:** [@hberg32](https://wled.discourse.group/u/hberg32)\
**Replies:** 2\
**Last updated:** [April 23, 2025, 11:55am UTC](https://wled.discourse.group/t/should-i-try-to-use-bluetooth-in-a-wled-usermod/14386 "2025-04-23T11:55:43Z")

</div>

Hello - I am new to WLED and wanted to ask the group if you think it is suitable for a project I want to work on. I’ve 3D printed this model of a TNG Warp Core Warp Core v2 by CrazyJ - Thingiverse which used WLED for th…

---

## [Fixing MAX17048 usermod](https://wled.discourse.group/t/fixing-max17048-usermod/14334)

<div class="topic-metadata">

**Author:** [@Tolo1996](https://wled.discourse.group/u/Tolo1996)\
**Replies:** 4\
**Last updated:** [April 15, 2025, 5:42pm UTC](https://wled.discourse.group/t/fixing-max17048-usermod/14334 "2025-04-15T17:42:38Z")

</div>

I would love to use the MAX17048 mod to monitor the battery charge, which I could use in my project powered by 18650 cells. Unfortunately, the mod was last updated a year ago and for some reason it is not visible after …

---

## [Ping Pong LED Clock instalation issue](https://wled.discourse.group/t/ping-pong-led-clock-instalation-issue/14291)

<div class="topic-metadata">

**Author:** [@Tolo1996](https://wled.discourse.group/u/Tolo1996)\
**Replies:** 7\
**Last updated:** [April 1, 2025, 6:37pm UTC](https://wled.discourse.group/t/ping-pong-led-clock-instalation-issue/14291 "2025-04-01T18:37:55Z")

</div>

Some time ago (actually it was probably two years ago) I built a watch from ping pong balls. Following the guide here: The watch was lying around for a long time gathering dust because I didn’t have time to write any i…

---

## [Is there a new Usermod system?](https://wled.discourse.group/t/is-there-a-new-usermod-system/14257)

<div class="topic-metadata">

**Author:** [@H4NNE5](https://wled.discourse.group/u/H4NNE5)\
**Replies:** 1\
**Last updated:** [March 23, 2025, 6:03am UTC](https://wled.discourse.group/t/is-there-a-new-usermod-system/14257 "2025-03-23T06:03:46Z")

</div>

Hi, After a few months break I pulled the latest 0.15 release for my WLED-branch and now my compiling throws these errors/hints: On the website I couldn’t find a new tutorial, how to set up usermods, so I’m confused…

---

## [Proposal: user scripts](https://wled.discourse.group/t/proposal-user-scripts/13687)

<div class="topic-metadata">

**Author:** [@chmondkind](https://wled.discourse.group/u/chmondkind)\
**Replies:** 4\
**Last updated:** [February 27, 2025, 1:40pm UTC](https://wled.discourse.group/t/proposal-user-scripts/13687 "2025-02-27T13:40:48Z")

</div>

Hi there This is my first post and I want to say thank you to all of you who contribute to this incredible project. It is by far the most user friendly and open RGB\* LED controller firmware ever. Recently I thought ab…

---

## [Issue with Usermods in WLED for Controlling an LED Strip with a Distance Sensor](https://wled.discourse.group/t/issue-with-usermods-in-wled-for-controlling-an-led-strip-with-a-distance-sensor/14040)

<div class="topic-metadata">

**Author:** [@ingyou2568\_30146](https://wled.discourse.group/u/ingyou2568_30146)\
**Replies:** 3\
**Last updated:** [February 12, 2025, 6:29am UTC](https://wled.discourse.group/t/issue-with-usermods-in-wled-for-controlling-an-led-strip-with-a-distance-sensor/14040 "2025-02-12T06:29:11Z")

</div>

Issue with Usermods in WLED for Controlling an LED Strip with a Distance Sensor Hello everyone, I’m new to WLED, but I have experience programming on ESP32 and VS code. I’m trying to implement a custom effect using a us…

---

## [Dual input with dual output sequence](https://wled.discourse.group/t/dual-input-with-dual-output-sequence/13842)

<div class="topic-metadata">

**Author:** [@FlyingDragonz](https://wled.discourse.group/u/FlyingDragonz)\
**Replies:** 5\
**Last updated:** [January 9, 2025, 7:14pm UTC](https://wled.discourse.group/t/dual-input-with-dual-output-sequence/13842 "2025-01-09T19:14:20Z")

</div>

Hi all. About a year a go, after seeking advice from these forums, I created a basic 5V WS281b strip setup for the front of my house as an illumination, attached along my fascia boards (5 meteres). The ac-dc power adapt…

[Next page](https://wled.discourse.group/c/usermods/11.md?page=1)
