# 1st time user **URL:** \ **Category:** Questions\ **Created:** [May 28, 2025, 7:56pm UTC](https://wled.discourse.group/t/1st-time-user/14525 "2025-05-28T19:56:56Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![psdwit](https://avatars.discourse-cdn.com/v4/letter/p/dbc845/32.png) [@psdwit](https://wled.discourse.group/u/psdwit)\ **Post date:** [May 28, 2025, 7:56pm UTC](https://wled.discourse.group/t/1st-time-user/14525/1 "2025-05-28T19:56:56Z")
Hey everyone, this is my first time setting something like this up I purchased the WLED controller and 5 rolls of BTF lightning (SK6812 SPU RGBW) LED strips. I’m trying to set it all up, I got the initial controller set up got it to light up one of the strips by changing it from 30 and now it’s all black. I know I messed up something somewhere but am clueless on how to fix it. This is all totally foreign to me and I am hoping to get some help to reset it all. Thank you all very much! _EDIT_ in playing around the app, it seems it is a “segment” issue with the strips, however, even though I may extend the segment through the end of the strip only part light up or light up different themes, there must be conflicting programming somewhere. Is there a way to reset to default setting? ---
**Author:** ![Jinx](https://avatars.discourse-cdn.com/v4/letter/j/c6cbf5/32.png) [@Jinx](https://wled.discourse.group/u/Jinx)\ **Post date:** [May 29, 2025, 7:22am UTC](https://wled.discourse.group/t/1st-time-user/14525/2 "2025-05-29T07:22:14Z")
I think I replied to you in the FB group if you are the person that was using the domestic automations controller. 🙂 ---
**Author:** ![psdwit](https://avatars.discourse-cdn.com/v4/letter/p/dbc845/32.png) [@psdwit](https://wled.discourse.group/u/psdwit)\ **Post date:** [May 29, 2025, 3:44pm UTC](https://wled.discourse.group/t/1st-time-user/14525/3 "2025-05-29T15:44:45Z")
Thank you. This is an area I have no experience in and am finding it difficult to find tutorials.