# 2D matix cube mapping

**URL:** <https://wled.discourse.group/t/2d-matix-cube-mapping/14917>\
**Category:** Questions\
**Created:** [October 23, 2025, 4:04pm UTC](https://wled.discourse.group/t/2d-matix-cube-mapping/14917 "2025-10-23T16:04:00Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bobinou](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/bobinou/32/9936_2.png) [@Bobinou](https://wled.discourse.group/u/Bobinou)\
**Post date:** [October 23, 2025, 4:04pm UTC](https://wled.discourse.group/t/2d-matix-cube-mapping/14917/1 "2025-10-23T16:04:00Z")

</div>

I have a cube made out of 6 8by8 matrices. Using the 2D setup i put all of them in the correct position and orientation but i have the issue that of course 2 panels (top, bottom) are breaking the immersion, because the animations only wrap on one edge.

Is there a way to have a mapping where every edge is wrapped to the next or is anything like this planned?