# 360 LEDs with ArtNet in 6x60 Matrix **URL:** \ **Category:** Questions\ **Created:** [November 13, 2021, 6:58am UTC](https://wled.discourse.group/t/360-leds-with-artnet-in-6x60-matrix/4012 "2021-11-13T06:58:01Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![DarthWeber](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/darthweber/32/7447_2.png) [@DarthWeber](https://wled.discourse.group/u/DarthWeber)\ **Post date:** [November 13, 2021, 6:58am UTC](https://wled.discourse.group/t/360-leds-with-artnet-in-6x60-matrix/4012/1 "2021-11-13T06:58:01Z")
Hi, i am too silly to setup my jinx to drive WLED as expected. I have 6x60 LEDs in a matrix connected in snakecolumns starting bottom right. So LED 1 is bottom right, direction up until 60, then one step left for 61 and direction down. All effects in WLED are working fine. But how do i setup it for jinx e.g. ? I activated artnet for a first test and i know, i need at least 2 universes. I setup 3 universe, 2 columns in one universe. So, column 1+2 = universe 1 … In jinx i setup the matrix in a corresponding way, but it is only for universe 0 right. Universe 1 starts in the middle of column 3 and is running over 3 columns - so 1st LED of 2nd universe is NOT on the bottom of the 3rd column - it is somewhere in the middle. How do i need to setup it right ? I even do not know if i missed something in the setup of WLED or jinx. And BTW - should i use artnet or E1.31 ? many thanks, tom ---
**Author:** ![DarthWeber](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/darthweber/32/7447_2.png) [@DarthWeber](https://wled.discourse.group/u/DarthWeber)\ **Post date:** [November 13, 2021, 7:38am UTC](https://wled.discourse.group/t/360-leds-with-artnet-in-6x60-matrix/4012/2 "2021-11-13T07:38:21Z")
think, i got it. I made a mistake since the channel number in jinx in the universe was not correct. Anyway, are there differences between those two protocols ? I am working with art-net - seems to do the job pretty well.