# Analog clock on multiple segments?

**URL:** <https://wled.discourse.group/t/analog-clock-on-multiple-segments/6397>\
**Category:** Questions\
**Created:** [November 18, 2022, 7:25pm UTC](https://wled.discourse.group/t/analog-clock-on-multiple-segments/6397 "2022-11-18T19:25:34Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![WledUser](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/wleduser/32/3881_2.png) [@WledUser](https://wled.discourse.group/u/WledUser)\
**Post date:** [November 18, 2022, 7:25pm UTC](https://wled.discourse.group/t/analog-clock-on-multiple-segments/6397/1 "2022-11-18T19:25:34Z")

</div>

Is there a way to deploy analog clock on multiple segments?

Ideally I would like one segment (inner circle) for the hour hand, and another segment (outter circle) for the minute and second hand.

I guess it would not only require using more segments, but also telling where what hands go…

Right now I believe clock mode does not care about segments, and only use one set of LEDs for the whole clock.  
Unless I didn’t understand the setup?  
I tried on 0.13.0b and also on 0.13.3

Thanks for any pointers

---

<div class="post-metadata">

**Author:** ![blazoncek](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/blazoncek/32/1886_2.png) [@blazoncek](https://wled.discourse.group/u/blazoncek)\
**Post date:** [November 19, 2022, 1:05pm UTC](https://wled.discourse.group/t/analog-clock-on-multiple-segments/6397/2 "2022-11-19T13:05:50Z")

</div>

No without a usermod.  
Unfortunately I am unaware of such usermod ATM.