# Audioreactive esp-32-c3-wroom **URL:** \ **Category:** Questions\ **Created:** [November 11, 2023, 10:47pm UTC](https://wled.discourse.group/t/audioreactive-esp-32-c3-wroom/9847 "2023-11-11T22:47:13Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![timmie644](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/timmie644/32/6285_2.png) [@timmie644](https://wled.discourse.group/u/timmie644)\ **Post date:** [November 11, 2023, 10:47pm UTC](https://wled.discourse.group/t/audioreactive-esp-32-c3-wroom/9847/1 "2023-11-11T22:47:13Z")
Is it possible to have the audioreactive usermod on the esp32 c3 wroom? ---
**Author:** ![only1tricky](https://avatars.discourse-cdn.com/v4/letter/o/2bfe46/32.png) [@only1tricky](https://wled.discourse.group/u/only1tricky)\ **Post date:** [November 12, 2023, 12:13am UTC](https://wled.discourse.group/t/audioreactive-esp-32-c3-wroom/9847/2 "2023-11-12T00:13:51Z")
> [@timmie644](#): > > d I hope so, I just bought a whole bunch of them. Programming should be the same as… [![](https://global.discourse-cdn.com/free1/uploads/wled/original/2X/9/907bdc899fe2ea1af2f636dc0a65b743d3da923a.jpeg "How To Install WLED on a ESP32 Ultimate Beginners Guide 2023") ](https://www.youtube.com/watch?v=mrVr4hIB94g) ---
**Author:** ![Jinx](https://avatars.discourse-cdn.com/v4/letter/j/c6cbf5/32.png) [@Jinx](https://wled.discourse.group/u/Jinx)\ **Post date:** [November 12, 2023, 1:29am UTC](https://wled.discourse.group/t/audioreactive-esp-32-c3-wroom/9847/3 "2023-11-12T01:29:42Z")
> [@ESP32-C3 Sound Reactive WLED: is it possible?](https://wled.discourse.group/t/esp32-c3-sound-reactive-wled-is-it-possible/5223/16): > > NOTE: C3 does not have the needed CPU power to compute FFT in realtime for FPS above 25. If you want to use C3 with Audioreactive usermod make sure you lower desired FPS to 25 in LED Settings (advanced section). The C3 only has a single core processor. Best to use regular Esp32’s I really don’t see why people keep buying the C3/S2’s They are better than an 8266 but not as good as the regular Esp32. ---
**Author:** ![blazoncek](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/blazoncek/32/1886_2.png) [@blazoncek](https://wled.discourse.group/u/blazoncek)\ **Post date:** [November 12, 2023, 6:37am UTC](https://wled.discourse.group/t/audioreactive-esp-32-c3-wroom/9847/4 "2023-11-12T06:37:15Z")
Price point. S2 can be bought for the price that may be lower than ESP8266. I haven’t had such success with C3 but it can be bought in the form of ESP01 for those that need it. ---
**Author:** ![melag](https://avatars.discourse-cdn.com/v4/letter/m/bc79bd/32.png) [@melag](https://wled.discourse.group/u/melag)\ **Post date:** [November 12, 2023, 11:01am UTC](https://wled.discourse.group/t/audioreactive-esp-32-c3-wroom/9847/5 "2023-11-12T11:01:58Z")
For me it is the form factor. The ESP32 C3 mini (or ‘supermini’) is the smallest devkit-like module with integrated USB connector and easily solderable. Together with the low cost, that makes these ideal to integrate into and replace the controller of existing ‘RGB LED smart’ stuff. I managed to compile C3-SR with the instructions on [https://wled-compile.github.io/](https://wled-compile.github.io/) For the small number of LEDs in the ‘smart stuff’, it works fine. ---
**Author:** ![ALDIY](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/aldiy/32/2716_2.png) [@ALDIY](https://wled.discourse.group/u/ALDIY)\ **Post date:** [November 12, 2023, 1:26pm UTC](https://wled.discourse.group/t/audioreactive-esp-32-c3-wroom/9847/6 "2023-11-12T13:26:08Z")
Yes it worked fine also for me with compiling on gh , did not test it with an actual digital mic but only for audio sync . The one i tested with digital mic is s2 and also works fine ![image](https://global.discourse-cdn.com/free1/uploads/wled/original/2X/7/7ea9e534da19b83a6bfb615f58b6b0988125d4a9.png)