# Cycle

**URL:** <https://wled.discourse.group/t/cycle/2960>\
**Category:** Questions\
**Created:** [May 31, 2021, 1:52pm UTC](https://wled.discourse.group/t/cycle/2960 "2021-05-31T13:52:13Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![lovedirk](https://avatars.discourse-cdn.com/v4/letter/l/858c86/32.png) [@lovedirk](https://wled.discourse.group/u/lovedirk)\
**Post date:** [May 31, 2021, 1:52pm UTC](https://wled.discourse.group/t/cycle/2960/1 "2021-05-31T13:52:13Z")

</div>

Hallo

Wenn ich bei Set current preset cycle setting as boot default:  
einen Hacken setze und speichere ist dieser nach erneuten Aufrufen der Seite wieder verschwunden.  
Was mache ich falsch ?

Gruß Dirk

---

<div class="post-metadata">

**Author:** ![Artacus](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/artacus/32/1258_2.png) [@Artacus](https://wled.discourse.group/u/Artacus)\
**Post date:** [May 31, 2021, 3:36pm UTC](https://wled.discourse.group/t/cycle/2960/2 "2021-05-31T15:36:32Z")

</div>

There is a German channel on our Discord group. You might try there if you don’t get an answer here.