# Dig-Quad Strange Behavior with strings \> 150 pixels

**URL:** <https://wled.discourse.group/t/dig-quad-strange-behavior-with-strings-150-pixels/6534>\
**Category:** Issues\
**Created:** [November 28, 2022, 6:06pm UTC](https://wled.discourse.group/t/dig-quad-strange-behavior-with-strings-150-pixels/6534 "2022-11-28T18:06:18Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Gahawn](https://avatars.discourse-cdn.com/v4/letter/g/f04885/32.png) [@Gahawn](https://wled.discourse.group/u/Gahawn)\
**Post date:** [November 28, 2022, 6:06pm UTC](https://wled.discourse.group/t/dig-quad-strange-behavior-with-strings-150-pixels/6534/1 "2022-11-28T18:06:18Z")

</div>

I’ve attached a copy of my current configuration. Using this setup, all 3 strips work fine up to 150 pixels. The 168 pixel string fails to light the remaining 18 pixels unless I manually change the configuration in LED preferences and resave it. This happens every time I power on the controller.

I tried setting it up as a continuous string (i.e. offsetting each LED output by the correct # of pixels) and then using segments but that has a different issue. While all pixels now light up, the 2nd and 3rd segments have smaller LED groups and a slower frame rate. This is very noticeable with the Candy Cane effect which, as you might imagine, is popular this time of year.

So, I’m stuck with either a smooth frame rate with the last 18 pixels dark, or 3 segments where two of them are noticeably different (slower and shorter color groups). I’m struggling to find the configuration that resolves all the issues. Please help!

Relevant info: this is an ESP32 module with WLED v0.13.3 installed.

 ![Image 001](https://global.discourse-cdn.com/free1/uploads/wled/original/2X/b/b86afe26025ab30f037b14fe85b469c9a489d4a3.png)

---

<div class="post-metadata">

**Author:** ![Jinx](https://avatars.discourse-cdn.com/v4/letter/j/c6cbf5/32.png) [@Jinx](https://wled.discourse.group/u/Jinx)\
**Post date:** [November 28, 2022, 9:28pm UTC](https://wled.discourse.group/t/dig-quad-strange-behavior-with-strings-150-pixels/6534/2 "2022-11-28T21:28:08Z")

</div>

Not real sure what exactly you are wanting to do.

If you want them all as one segment make sure the segment is set on 0 to 408

If you are wanting to offset because different segments are different lengths I can’t help there as I have never tried that. Maybe try a search for offset. I know I have seen it talked about but can’t remember if it was here or discord.