# Dim strip in middle of run

**URL:** <https://wled.discourse.group/t/dim-strip-in-middle-of-run/6160>\
**Category:** Uncategorized\
**Created:** [October 21, 2022, 7:22am UTC](https://wled.discourse.group/t/dim-strip-in-middle-of-run/6160 "2022-10-21T07:22:52Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Licker223](https://avatars.discourse-cdn.com/v4/letter/l/3e96dc/32.png) [@Licker223](https://wled.discourse.group/u/Licker223)\
**Post date:** [October 21, 2022, 7:22am UTC](https://wled.discourse.group/t/dim-strip-in-middle-of-run/6160/1 "2022-10-21T07:22:52Z")

</div>

Dim strip in middle of run. Running two separate 15 meter runs (three 5 meter strips)ws2811 off dig quad, one run is dimmer in the center strip the other is beginning and end strip.I’ve tried injecting power and a different light strip. Is there a setting in WLED that addresses this. I’ve also tested volts. I’m at 12 volts at the end of my second strip. Injecting more power did nothing to change the brightness. Please tell me there’s a setting in WLED I’m missing

---

<div class="post-metadata">

**Author:** ![tonyno](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/tonyno/32/242_2.png) [@tonyno](https://wled.discourse.group/u/tonyno)\
**Post date:** [October 21, 2022, 9:01pm UTC](https://wled.discourse.group/t/dim-strip-in-middle-of-run/6160/2 "2022-10-21T21:01:55Z")

</div>

There is no setting that would make some LEDs dimmer that the other unless you are running multiple segments that aligned with that.

---

<div class="post-metadata">

**Author:** ![Licker223](https://avatars.discourse-cdn.com/v4/letter/l/3e96dc/32.png) [@Licker223](https://wled.discourse.group/u/Licker223)\
**Post date:** [October 21, 2022, 11:48pm UTC](https://wled.discourse.group/t/dim-strip-in-middle-of-run/6160/3 "2022-10-21T23:48:12Z")

</div>

Qundor responded on Reddit, turns out I had to turn off the power limiter. Now they are all the same