# First 122 not working but last does **URL:** \ **Category:** Questions\ **Created:** [October 7, 2024, 1:36am UTC](https://wled.discourse.group/t/first-122-not-working-but-last-does/12874 "2024-10-07T01:36:59Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![joe](https://avatars.discourse-cdn.com/v4/letter/j/b9e5f3/32.png) [@joe](https://wled.discourse.group/u/joe)\ **Post date:** [October 7, 2024, 1:36am UTC](https://wled.discourse.group/t/first-122-not-working-but-last-does/12874/1 "2024-10-07T01:36:59Z")
need some help… first 122 leds aren’t working but the last 60 work (and with effects)… so not a signal issue (maybe)… ---
**Author:** ![jnrollins](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/jnrollins/32/8261_2.png) [@jnrollins](https://wled.discourse.group/u/jnrollins)\ **Post date:** [October 7, 2024, 5:22pm UTC](https://wled.discourse.group/t/first-122-not-working-but-last-does/12874/2 "2024-10-07T17:22:29Z")
Without more info my only suggestion is to double check you don’t inadvertently have a second segment defined which would split your strip up. I suppose after that your options are to test with a different strip, different esp board, fresh WLED install etc etc. Those are usually my first troubleshooting steps. ---
**Author:** ![joe](https://avatars.discourse-cdn.com/v4/letter/j/b9e5f3/32.png) [@joe](https://wled.discourse.group/u/joe)\ **Post date:** [October 8, 2024, 1:34am UTC](https://wled.discourse.group/t/first-122-not-working-but-last-does/12874/3 "2024-10-08T01:34:03Z")
I have to apologize to you and anyone who might have looked at this thread. Issue is/was user error. I had accidently checked skip the leds in software. Doesn’t pay to drink and WLED… Do appreciate input…