# Fully fledged Staircase implementation

**URL:** <https://wled.discourse.group/t/fully-fledged-staircase-implementation/2182>\
**Category:** Projects\
**Created:** [January 27, 2021, 4:00pm UTC](https://wled.discourse.group/t/fully-fledged-staircase-implementation/2182 "2021-01-27T16:00:43Z")\
**Posts on this page:** 1\
**Showing post:** 25

<div class="post-metadata">

**Author:** ![madradrakie](https://avatars.discourse-cdn.com/v4/letter/m/dc4da7/32.png) [@madradrakie](https://wled.discourse.group/u/madradrakie)\
**Post date:** [March 14, 2021, 8:35pm UTC](https://wled.discourse.group/t/fully-fledged-staircase-implementation/2182/25 "2021-03-14T20:35:56Z")

</div>

@pa1okz

i followed the instructions from the github page.  
The steps i took:

1. I downloaded the WLED dev zip file and opened it in VisualStudio
2. I added at the top of the file the following:

 ![image](https://global.discourse-cdn.com/free1/uploads/wled/original/2X/9/9f2c6c32f20248086a73b4dcc848bc2916c72569.png)

1. At the bottom i added:

 ![image](https://global.discourse-cdn.com/free1/uploads/wled/original/2X/6/602221801a2b75656dd12199b9ac42a8141fcfed.png)

1. in usermods i changed the pin nummering:

 ![image](https://global.discourse-cdn.com/free1/uploads/wled/original/2X/0/041f2bbc4ca79fc838ac5a84294a9284b248117a.png)

1. I compiled the file and used default\_envs = wemos\_shield\_esp32

2. I flashed the esp32 and logged in to WLED

 ![image](https://global.discourse-cdn.com/free1/uploads/wled/original/2X/9/907e5c828cccff893a095a635165486869215da1.png)  
 ![image](https://global.discourse-cdn.com/free1/uploads/wled/original/2X/9/931c97c1e50bfa42ebe22298161dbead3c630bc5.png)

1. I attached the led strip to pin D2 but the lights are not doing anything. Also when i press at peek normally you see the effect in the bar underneath the buttons butt nothing appears. No animation is displayed.

That is the point were i am stuck…

---

_[View the full topic](https://wled.discourse.group/t/fully-fledged-staircase-implementation/2182)._