# HTTP command

**URL:** <https://wled.discourse.group/t/http-command/11680>\
**Category:** Questions\
**Created:** [April 23, 2024, 11:26am UTC](https://wled.discourse.group/t/http-command/11680 "2024-04-23T11:26:13Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Lars](https://avatars.discourse-cdn.com/v4/letter/l/74df32/32.png) [@Lars](https://wled.discourse.group/u/Lars)\
**Post date:** [April 23, 2024, 11:26am UTC](https://wled.discourse.group/t/http-command/11680/1 "2024-04-23T11:26:13Z")

</div>

Hello everyone, I’m new here and this is my first project. I have an ESP8266 and a LED strip WS2814. I would like to send an HTTP command via a KNX visualization. When a KNX motion detector detects me, the light from LED 1 to LED72 should pass through and then be switched on. When you turn off the light, it should run back and then turn off. With Wled I always only see effects but not just a switch-on effect. Maybe someone can help me. I want to send the switch-on command and switch-off command via an HTTP command from KNX

---

<div class="post-metadata">

**Author:** ![Magig\_Wled](https://avatars.discourse-cdn.com/v4/letter/m/db5fbb/32.png) [@Magig\_Wled](https://wled.discourse.group/u/Magig_Wled)\
**Post date:** [April 23, 2024, 1:50pm UTC](https://wled.discourse.group/t/http-command/11680/2 "2024-04-23T13:50:53Z")

</div>

use the preset on START up ((config LED)) to take your effect at start

---

<div class="post-metadata">

**Author:** ![Lars](https://avatars.discourse-cdn.com/v4/letter/l/74df32/32.png) [@Lars](https://wled.discourse.group/u/Lars)\
**Post date:** [April 24, 2024, 2:19pm UTC](https://wled.discourse.group/t/http-command/11680/3 "2024-04-24T14:19:08Z")

</div>

I don’t understand, I’m new. Can you please explain it in more detail?

---

<div class="post-metadata">

**Author:** ![Magig\_Wled](https://avatars.discourse-cdn.com/v4/letter/m/db5fbb/32.png) [@Magig\_Wled](https://wled.discourse.group/u/Magig_Wled)\
**Post date:** [April 24, 2024, 3:21pm UTC](https://wled.discourse.group/t/http-command/11680/4 "2024-04-24T15:21:44Z")

</div>

there are Videos available for this  
like this one

[![](https://global.discourse-cdn.com/free1/uploads/wled/original/2X/e/e7a9d889ef01ae79cfaa4f94f613226420995db5.jpeg "Customize Default WLED Settings For After Power Loss | WLED Tips #shorts") ](https://www.youtube.com/watch?v=3OKaDt5qGag)

---

<div class="post-metadata">

**Author:** ![ALDIY](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/aldiy/32/2716_2.png) [@ALDIY](https://wled.discourse.group/u/ALDIY)\
**Post date:** [April 25, 2024, 12:49pm UTC](https://wled.discourse.group/t/http-command/11680/5 "2024-04-25T12:49:22Z")

</div>

If the aim is something like this or wipe as in the video

![wipe2](https://global.discourse-cdn.com/free1/uploads/wled/original/2X/e/ee8137ae60dc02afb8072243f85f8041b9f02768.gif)

then look at this post for some info  
[Wipe & sweep ceiling LEDs strip light - #5 by ALDIY](https://wled.discourse.group/t/wipe-sweep-ceiling-leds-strip-light/5627/5) , otherwise clarify more what you are after