# Is there any way to use WLed over Zigbee?

**URL:** <https://wled.discourse.group/t/is-there-any-way-to-use-wled-over-zigbee/11727>\
**Category:** Hardware\
**Created:** [April 27, 2024, 7:23pm UTC](https://wled.discourse.group/t/is-there-any-way-to-use-wled-over-zigbee/11727 "2024-04-27T19:23:17Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![shadowwizard](https://avatars.discourse-cdn.com/v4/letter/s/bc79bd/32.png) [@shadowwizard](https://wled.discourse.group/u/shadowwizard)\
**Post date:** [April 27, 2024, 7:23pm UTC](https://wled.discourse.group/t/is-there-any-way-to-use-wled-over-zigbee/11727/1 "2024-04-27T19:23:17Z")

</div>

Are there any way anyone knows to do this? An esp32 with Zigbee instead of wifi? Or anything of the sort? Just a thought…

---

<div class="post-metadata">

**Author:** ![ALDIY](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/aldiy/32/2716_2.png) [@ALDIY](https://wled.discourse.group/u/ALDIY)\
**Post date:** [April 27, 2024, 7:32pm UTC](https://wled.discourse.group/t/is-there-any-way-to-use-wled-over-zigbee/11727/2 "2024-04-27T19:32:00Z")

</div>

Nothing for zigbee or Bluetooth ( well Bluetooth there is some guys who did that ) , I assume you mean on something like ESP32-H2 so short answer is no

---

<div class="post-metadata">

**Author:** ![divsys](https://avatars.discourse-cdn.com/v4/letter/d/a3d4f5/32.png) [@divsys](https://wled.discourse.group/u/divsys)\
**Post date:** [April 27, 2024, 7:32pm UTC](https://wled.discourse.group/t/is-there-any-way-to-use-wled-over-zigbee/11727/3 "2024-04-27T19:32:45Z")

</div>

There’s talk about the new ESP32-H boards possibly allowing this, but that’s pure speculation at this point.

What are you hoping to accomplish via Zigbee?  
There’s a number of possibilities when you add Home Assistant to the mix…

---

<div class="post-metadata">

**Author:** ![shadowwizard](https://avatars.discourse-cdn.com/v4/letter/s/bc79bd/32.png) [@shadowwizard](https://wled.discourse.group/u/shadowwizard)\
**Post date:** [April 27, 2024, 8:04pm UTC](https://wled.discourse.group/t/is-there-any-way-to-use-wled-over-zigbee/11727/4 "2024-04-27T20:04:27Z")

</div>

Yup. I have both ZHA and Zigbee2MQTT set up (I have some devices that work better with one or the other) figured that it would just take a bit of strain off my wifi… And just permit me to use the Zigbee network more. And maybe even ask as a Zigbee repeater since its plugged in…  
So I guess I wait for ESP32-H.

---

<div class="post-metadata">

**Author:** ![artymarty](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/artymarty/32/5323_2.png) [@artymarty](https://wled.discourse.group/u/artymarty)\
**Post date:** [April 27, 2024, 11:20pm UTC](https://wled.discourse.group/t/is-there-any-way-to-use-wled-over-zigbee/11727/5 "2024-04-27T23:20:22Z")

</div>

Zigbee wled would be awesome as I have use cases where wifi signal is a huge issue but zigbee works fine.  
AliExpress does have a zigbee addressable LED driver module that works with home assistant, however there’s about 4 “effects” and they are boring… Basically just good for colour changes, blinky Christmas lights, a bit of scrolling/chasing and a lame “fire” type effect.

Once you’ve seen what wled can do, the zigbee module is so disappointing to use😂… But it’s about the only one that works with addressable LEDs  
[https://a.aliexpress.com/\_mqowoGi](https://a.aliexpress.com/_mqowoGi)

There are heaps of zigbee rgb controllers available, but this is the only addressable one I could find.

I’m basically using this until a zigbee wled solution is available and then I’ll swap the controller…

Can’t wait for a proper wled+zigbee+homeassistant solution 🙏

---

<div class="post-metadata">

**Author:** ![Jinx](https://avatars.discourse-cdn.com/v4/letter/j/c6cbf5/32.png) [@Jinx](https://wled.discourse.group/u/Jinx)\
**Post date:** [April 28, 2024, 6:51am UTC](https://wled.discourse.group/t/is-there-any-way-to-use-wled-over-zigbee/11727/6 "2024-04-28T06:51:57Z")

</div>

Well I suppose you could leave the controller in AP mode if you don’t want it on your wifi and then connect to it’s AP from your phone or pc and create a bunch of presets. Then use 1 or more zigbee relay’s to act as buttons connected to the controller to cycle presets/call certain ones.

---

<div class="post-metadata">

**Author:** ![artymarty](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/artymarty/32/5323_2.png) [@artymarty](https://wled.discourse.group/u/artymarty)\
**Post date:** [May 7, 2024, 3:08am UTC](https://wled.discourse.group/t/is-there-any-way-to-use-wled-over-zigbee/11727/7 "2024-05-07T03:08:25Z")

</div>

That’s one solution I’ve considered…

Looking forward to a board that has wifi and zigbee that can integrate the board…
