# It is possible to connect to an esp32: 1 GY-MAX4466 and KY-022 **URL:** \ **Category:** Questions\ **Created:** [October 11, 2023, 2:25am UTC](https://wled.discourse.group/t/it-is-possible-to-connect-to-an-esp32-1-gy-max4466-and-ky-022/9448 "2023-10-11T02:25:26Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![adrian1215](https://avatars.discourse-cdn.com/v4/letter/a/a88e4f/32.png) [@adrian1215](https://wled.discourse.group/u/adrian1215)\ **Post date:** [October 11, 2023, 2:25am UTC](https://wled.discourse.group/t/it-is-possible-to-connect-to-an-esp32-1-gy-max4466-and-ky-022/9448/1 "2023-10-11T02:25:26Z")
I need to make a 3600 LED project. which I require to be audio-rhythmic and controllable through remote control. My question is how do I connect both devices to the esp32? ---
**Author:** ![ALDIY](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/aldiy/32/2716_2.png) [@ALDIY](https://wled.discourse.group/u/ALDIY)\ **Post date:** [October 11, 2023, 3:00am UTC](https://wled.discourse.group/t/it-is-possible-to-connect-to-an-esp32-1-gy-max4466-and-ky-022/9448/2 "2023-10-11T03:00:36Z")
Sure you can use a mic ( max4466 will give you headache with wled ) and also IR receiver . The mic config is here [Audio Reactive WLED - WLED Project](https://kno.wled.ge/advanced/audio-reactive/) And for the IR info is here [Infrared - WLED Project](https://kno.wled.ge/interfaces/json-ir/json_infrared/#editing-irjson) Bins to flash your esp are here [Install WLED](https://install.wled.me/) and here [WLED installation (wled-install.github.io)](https://wled-install.github.io/) ---
**Author:** ![adrian1215](https://avatars.discourse-cdn.com/v4/letter/a/a88e4f/32.png) [@adrian1215](https://wled.discourse.group/u/adrian1215)\ **Post date:** [October 11, 2023, 3:39am UTC](https://wled.discourse.group/t/it-is-possible-to-connect-to-an-esp32-1-gy-max4466-and-ky-022/9448/3 "2023-10-11T03:39:08Z")
Another question and sorry for my lack of knowledge. I have it within my reach to buy cheap SM16703P LED strips. Do they support esp32 driver? ![WhatsApp Image 2023-10-10 at 22.35.06](https://global.discourse-cdn.com/free1/uploads/wled/original/2X/5/50707de85f9e0b9faf59da6c1e202437a4b9d8e7.jpeg) ---
**Author:** ![ALDIY](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/aldiy/32/2716_2.png) [@ALDIY](https://wled.discourse.group/u/ALDIY)\ **Post date:** [October 11, 2023, 3:55am UTC](https://wled.discourse.group/t/it-is-possible-to-connect-to-an-esp32-1-gy-max4466-and-ky-022/9448/4 "2023-10-11T03:55:47Z")
> [@adrian1215](#): > > SM16703P SM16703P is ws2811 compatible and others have reported it will work with wled so go ahead ---
**Author:** ![adrian1215](https://avatars.discourse-cdn.com/v4/letter/a/a88e4f/32.png) [@adrian1215](https://wled.discourse.group/u/adrian1215)\ **Post date:** [October 11, 2023, 4:09am UTC](https://wled.discourse.group/t/it-is-possible-to-connect-to-an-esp32-1-gy-max4466-and-ky-022/9448/5 "2023-10-11T04:09:24Z")
ok and regarding the microphone and the IR receiver. Should I place the connection of both at 3V of the esp32? or is external power supplied? ---
**Author:** ![TheLight3r](https://avatars.discourse-cdn.com/v4/letter/t/45deac/32.png) [@TheLight3r](https://wled.discourse.group/u/TheLight3r)\ **Post date:** [October 11, 2023, 4:41am UTC](https://wled.discourse.group/t/it-is-possible-to-connect-to-an-esp32-1-gy-max4466-and-ky-022/9448/6 "2023-10-11T04:41:35Z")
You can power it directly from it, but I believe there is just one 3.3V Pin? ---
**Author:** ![Jinx](https://avatars.discourse-cdn.com/v4/letter/j/c6cbf5/32.png) [@Jinx](https://wled.discourse.group/u/Jinx)\ **Post date:** [October 11, 2023, 8:09am UTC](https://wled.discourse.group/t/it-is-possible-to-connect-to-an-esp32-1-gy-max4466-and-ky-022/9448/7 "2023-10-11T08:09:29Z")
If those are 24v strips, 6 pixels will be tied to 1 address, meaning every 6 will act as 1 pixel and will all be the same color. Not sure what kind of Fx you are looking for but that will be pretty long bands of 1 color, depending on what you are looking to do. ---
**Author:** ![adrian1215](https://avatars.discourse-cdn.com/v4/letter/a/a88e4f/32.png) [@adrian1215](https://wled.discourse.group/u/adrian1215)\ **Post date:** [October 12, 2023, 1:59am UTC](https://wled.discourse.group/t/it-is-possible-to-connect-to-an-esp32-1-gy-max4466-and-ky-022/9448/8 "2023-10-12T01:59:47Z")
la tira led que usare tiene 12v 3 pixel