# Jinx Wifi connecting via Wled and Arduino Flash

**URL:** <https://wled.discourse.group/t/jinx-wifi-connecting-via-wled-and-arduino-flash/4512>\
**Category:** Issues\
**Created:** [December 27, 2021, 6:14pm UTC](https://wled.discourse.group/t/jinx-wifi-connecting-via-wled-and-arduino-flash/4512 "2021-12-27T18:14:16Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![ALDIY](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/aldiy/32/2716_2.png) [@ALDIY](https://wled.discourse.group/u/ALDIY)\
**Post date:** [December 28, 2021, 12:04am UTC](https://wled.discourse.group/t/jinx-wifi-connecting-via-wled-and-arduino-flash/4512/2 "2021-12-28T00:04:48Z")

</div>

Hi and welcome ,  
I haven’t used Wled-Jinx yet , i will try to install it

Since you are using e1.31 and matrix then check the below as it has the matrix correct configuration in WLED and the server ( xlights in this case but it should be same ) .

Just test with wled 0.13.0-b4 because this is what i am using and it has the direct setting for a matrix

Report back if this does not fix it and we can test Wled-Jinx

> [@Are there any Xlights users here?](https://wled.discourse.group/t/are-there-any-xlights-users-here/674/20):
>
> sure , I think this is going to be a nice thing to do . What we can do is get the config of your xlights and wled LED setup and I will do the same and send it to you shortly .

---

_[View the full topic](https://wled.discourse.group/t/jinx-wifi-connecting-via-wled-and-arduino-flash/4512)._