# Led Its addresses

**URL:** <https://wled.discourse.group/t/led-its-addresses/8088>\
**Category:** Questions\
**Created:** [April 21, 2023, 7:06pm UTC](https://wled.discourse.group/t/led-its-addresses/8088 "2023-04-21T19:06:48Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![jimi](https://avatars.discourse-cdn.com/v4/letter/j/eb8c5e/32.png) [@jimi](https://wled.discourse.group/u/jimi)\
**Post date:** [April 21, 2023, 7:06pm UTC](https://wled.discourse.group/t/led-its-addresses/8088/1 "2023-04-21T19:06:48Z")

</div>

Hi, newbie question here: Every time I turn off my strips they jump to a new ip address so I have to ‘discover’ them every time I turn it back on. Is there a way to set each to a static IP?  
Tank you!

---

<div class="post-metadata">

**Author:** ![ALDIY](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/aldiy/32/2716_2.png) [@ALDIY](https://wled.discourse.group/u/ALDIY)\
**Post date:** [April 21, 2023, 11:45pm UTC](https://wled.discourse.group/t/led-its-addresses/8088/2 "2023-04-21T23:45:39Z")

</div>

Yes you can setup static ip with your router ( look under dhcp address reservation ) .  
You could also setup static ip in wled wifi page but having static ip on the router is better .

---

<div class="post-metadata">

**Author:** ![jimi](https://avatars.discourse-cdn.com/v4/letter/j/eb8c5e/32.png) [@jimi](https://wled.discourse.group/u/jimi)\
**Post date:** [April 28, 2023, 6:37pm UTC](https://wled.discourse.group/t/led-its-addresses/8088/3 "2023-04-28T18:37:09Z")

</div>

Thank you!!