# Limit of pixels on quin-dig-uno

**URL:** <https://wled.discourse.group/t/limit-of-pixels-on-quin-dig-uno/3094>\
**Category:** Questions\
**Created:** [June 24, 2021, 1:50pm UTC](https://wled.discourse.group/t/limit-of-pixels-on-quin-dig-uno/3094 "2021-06-24T13:50:23Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Stenger](https://avatars.discourse-cdn.com/v4/letter/s/e19b73/32.png) [@Stenger](https://wled.discourse.group/u/Stenger)\
**Post date:** [June 24, 2021, 1:50pm UTC](https://wled.discourse.group/t/limit-of-pixels-on-quin-dig-uno/3094/1 "2021-06-24T13:50:23Z")

</div>

Hi  
What is the limit of pixels on one output?  
I can’t get above 240 pixels

---

<div class="post-metadata">

**Author:** ![huggy-d1](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/huggy-d1/32/51_2.png) [@huggy-d1](https://wled.discourse.group/u/huggy-d1)\
**Post date:** [June 24, 2021, 3:56pm UTC](https://wled.discourse.group/t/limit-of-pixels-on-quin-dig-uno/3094/2 "2021-06-24T15:56:53Z")

</div>

Even in an ESP8266, you should be able to define ~500 without much problem.  
You will most likely need multiple power injection leads from the power supply to the strip for 500.  
For 240, you should inject power on both ends, and in the middle too if convenient.

---

<div class="post-metadata">

**Author:** ![Changchung](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/changchung/32/3115_2.png) [@Changchung](https://wled.discourse.group/u/Changchung)\
**Post date:** [May 9, 2022, 7:03pm UTC](https://wled.discourse.group/t/limit-of-pixels-on-quin-dig-uno/3094/3 "2022-05-09T19:03:20Z")

</div>

Uncheck the automatic brightness limiter in the app. Diguno has 2 outputs. You can control a lot of pixels with it.

 ![WLED_LEDhardware](https://global.discourse-cdn.com/free1/uploads/wled/original/2X/2/23485523b76bd0baa8b0a5c6741440127a845bdd.png)

---

<div class="post-metadata">

**Author:** ![Matts6foot8](https://avatars.discourse-cdn.com/v4/letter/m/6a8cbe/32.png) [@Matts6foot8](https://wled.discourse.group/u/Matts6foot8)\
**Post date:** [November 20, 2022, 10:48pm UTC](https://wled.discourse.group/t/limit-of-pixels-on-quin-dig-uno/3094/4 "2022-11-20T22:48:31Z")

</div>

My solution was refresh rate. I lowered that input slightly and wled accepted the led count