# Multiple NodeMCU with wled on Xlights

**URL:** <https://wled.discourse.group/t/multiple-nodemcu-with-wled-on-xlights/4568>\
**Category:** Issues\
**Created:** [January 1, 2022, 6:09am UTC](https://wled.discourse.group/t/multiple-nodemcu-with-wled-on-xlights/4568 "2022-01-01T06:09:40Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![ALDIY](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/aldiy/32/2716_2.png) [@ALDIY](https://wled.discourse.group/u/ALDIY)\
**Post date:** [January 3, 2022, 1:29pm UTC](https://wled.discourse.group/t/multiple-nodemcu-with-wled-on-xlights/4568/3 "2022-01-03T13:29:15Z")

</div>

Hi , I hope you manged to fix this and if not then let us know because we have been tinkering with xlights and matrices and might be we can help even with multiple MCUs . Check here first

> [@Are there any Xlights users here?](https://wled.discourse.group/t/are-there-any-xlights-users-here/674/20):
>
> sure , I think this is going to be a nice thing to do . What we can do is get the config of your xlights and wled LED setup and I will do the same and send it to you shortly .

In any case if you are not invested in xlights much then i would advice you to try Jinx instead because I think it is a bit easier to run and use specially with matrices and text .

Cheers

---

_[View the full topic](https://wled.discourse.group/t/multiple-nodemcu-with-wled-on-xlights/4568)._