# Need help with my very specific use case

**URL:** <https://wled.discourse.group/t/need-help-with-my-very-specific-use-case/14376>\
**Category:** Questions\
**Created:** [April 19, 2025, 1:58pm UTC](https://wled.discourse.group/t/need-help-with-my-very-specific-use-case/14376 "2025-04-19T13:58:14Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Wall](https://avatars.discourse-cdn.com/v4/letter/w/7feea3/32.png) [@Wall](https://wled.discourse.group/u/Wall)\
**Post date:** [April 19, 2025, 1:58pm UTC](https://wled.discourse.group/t/need-help-with-my-very-specific-use-case/14376/1 "2025-04-19T13:58:14Z")

</div>

Hey,

I’m currently working on a project, and I was planning to use the QuinLED Dig-Octa boards. I need WLED to do very specific things:

- 4x 24v RGBWW Strips, that are motion activated (using the PIRsensorSwitch usermod) but can also be used for displaying effects via the WIZ remote or the App (that’s why I have the “off-only” setting for the usermod enabled).
- 2x 24v WW COB Strips, two button inputs for each strip
- 2x 24v CW COB, one button input for both strips

I have it all worked out but the problem I’m facing is with turning off the controller… I can’t use presets because when I do, they turn off every strip and if I configure it in a way that only segments are turned off (bri=0%) the motions sensors don’t trigger anymore because they only do when the power is off (“off-only” setting is active because I also want to play effects and I don’t want them to be interrupted by the motion sensor triggering).

Is there a way to make this all work without Home Assistance and with one WLED instance?  
Maybe there is an usermod that checks if all strips are at 0% brightness and turns off the controller?

Thanks in advance 😃