# Presets + pirsensor usermod

**URL:** <https://wled.discourse.group/t/presets-pirsensor-usermod/12986>\
**Category:** Questions\
**Created:** [October 18, 2024, 8:13am UTC](https://wled.discourse.group/t/presets-pirsensor-usermod/12986 "2024-10-18T08:13:06Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![seegge](https://avatars.discourse-cdn.com/v4/letter/s/848f3c/32.png) [@seegge](https://wled.discourse.group/u/seegge)\
**Post date:** [October 18, 2024, 8:13am UTC](https://wled.discourse.group/t/presets-pirsensor-usermod/12986/1 "2024-10-18T08:13:06Z")

</div>

Hello, I’m trying to set up corridor light with 3 presets:

1: bright white, enabled by motion sensor for 5 minutes  
2: dim lights (at night)  
3: off (at day)

Motion sensor should enable #1 for 3 minutes and then preset 2 or 3 depending time of the day. Usermod allows pir sensor to activate #1 but then it reverts to chosen preset. Is there a way to make that time dependant?

---

<div class="post-metadata">

**Author:** ![Jinx](https://avatars.discourse-cdn.com/v4/letter/j/c6cbf5/32.png) [@Jinx](https://wled.discourse.group/u/Jinx)\
**Post date:** [October 18, 2024, 11:58pm UTC](https://wled.discourse.group/t/presets-pirsensor-usermod/12986/3 "2024-10-18T23:58:32Z")

</div>

Jack is a spam bot. I advise you to NOT click their links.