# Problem flashing WLED to ESP32 **URL:** \ **Category:** Issues\ **Created:** [April 15, 2020, 7:17pm UTC](https://wled.discourse.group/t/problem-flashing-wled-to-esp32/331 "2020-04-15T19:17:00Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![wingscastona](https://avatars.discourse-cdn.com/v4/letter/w/c4cdca/32.png) [@wingscastona](https://wled.discourse.group/u/wingscastona)\ **Post date:** [April 15, 2020, 7:17pm UTC](https://wled.discourse.group/t/problem-flashing-wled-to-esp32/331/1 "2020-04-15T19:17:00Z")
![ESP32 Flash](https://global.discourse-cdn.com/free1/uploads/wled/original/1X/e340d6c2a4a689fc0adebc218a052655619d6105.png) I can’t seem to get WLED working on esp32. I have successfully uploaded blink sketch through Arduino IDE. with pyflasher as in picture I get nothing. I uploaded a sketch to establish home wifi connection and print out issued IP address and command prompt ping, sent 4 packets, received 4 packets, loss 0. I then reflashed WLED and again nothing. I ping again and 4 sent and 4 received. with the little knowledge I have about this stuff I am stumped. I have done over a dozen 8266’s with no problems. this 32 has me scratching my head. any idea’s, thank you. ---
**Author:** ![tonyno](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/tonyno/32/242_2.png) [@tonyno](https://wled.discourse.group/u/tonyno)\ **Post date:** [April 15, 2020, 7:50pm UTC](https://wled.discourse.group/t/problem-flashing-wled-to-esp32/331/2 "2020-04-15T19:50:02Z")
I was never able to get that to work. I use ESPHome-Flasher without issues. ---
**Author:** ![wingscastona](https://avatars.discourse-cdn.com/v4/letter/w/c4cdca/32.png) [@wingscastona](https://wled.discourse.group/u/wingscastona)\ **Post date:** [April 15, 2020, 8:36pm UTC](https://wled.discourse.group/t/problem-flashing-wled-to-esp32/331/3 "2020-04-15T20:36:46Z")
Thank You tonyno. that did the trick! got it going! again, thanks.