# QuinLED\_Dig\_Uno\_Temp\_MQTT usermod

**URL:** <https://wled.discourse.group/t/quinled-dig-uno-temp-mqtt-usermod/86>\
**Category:** Enhancements\
**Created:** [February 8, 2020, 3:33am UTC](https://wled.discourse.group/t/quinled-dig-uno-temp-mqtt-usermod/86 "2020-02-08T03:33:22Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Slow2Git](https://avatars.discourse-cdn.com/v4/letter/s/a183cd/32.png) [@Slow2Git](https://wled.discourse.group/u/Slow2Git)\
**Post date:** [February 8, 2020, 3:33am UTC](https://wled.discourse.group/t/quinled-dig-uno-temp-mqtt-usermod/86/1 "2020-02-08T03:33:22Z")

</div>

srg74, thank you for adding support for Quin’s temp sensor. I have a suggestion to improve support for it.

wled00.txt  
#include \<DallasTemperature.h\>  
OneWire oneWire(14);  
…

Pin 14 is hardcoded which is fine for an 8266, but we need to use pin 18 for an ESP32.

My suggestion would be to do something like:  
#include \<DallasTemperature.h\>  
#ifdef ESP8266  
#define ONE\_WIRE\_BUS 14  
#else  
#define ONE\_WIRE\_BUS 18  
#endif  
OneWire oneWire(ONE\_WIRE\_BUS);  
…

Sound good? Is there a better way?

---

<div class="post-metadata">

**Author:** ![srg74](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/srg74/32/3018_2.png) [@srg74](https://wled.discourse.group/u/srg74)\
**Post date:** [February 8, 2020, 7:38pm UTC](https://wled.discourse.group/t/quinled-dig-uno-temp-mqtt-usermod/86/2 "2020-02-08T19:38:59Z")

</div>

Thank you for a feedback. I’m planning to implement support for both ESP8266 and ESP32 for my board which is similar to QuinLED board but with additional features. I will post info when it will be ready. Meanwhile you can check my git [https://github.com/srg74/WLED-wemos-shield](https://github.com/srg74/WLED-wemos-shield)

---

<div class="post-metadata">

**Author:** ![srg74](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/srg74/32/3018_2.png) [@srg74](https://wled.discourse.group/u/srg74)\
**Post date:** [March 6, 2020, 12:54am UTC](https://wled.discourse.group/t/quinled-dig-uno-temp-mqtt-usermod/86/3 "2020-03-06T00:54:25Z")

</div>

@Slow2Git Hi! All features is added to UserMod for QuinLed board. So you can use it.