# RF433 usermod wont accept new rf433 commands

**URL:** <https://wled.discourse.group/t/rf433-usermod-wont-accept-new-rf433-commands/14493>\
**Category:** Usermods\
**Created:** [May 18, 2025, 6:08pm UTC](https://wled.discourse.group/t/rf433-usermod-wont-accept-new-rf433-commands/14493 "2025-05-18T18:08:58Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![rxtx2](https://avatars.discourse-cdn.com/v4/letter/r/c77e96/32.png) [@rxtx2](https://wled.discourse.group/u/rxtx2)\
**Post date:** [May 18, 2025, 6:08pm UTC](https://wled.discourse.group/t/rf433-usermod-wont-accept-new-rf433-commands/14493/1 "2025-05-18T18:08:58Z")

</div>

I sucessfull build usermod\_v2\_RF433. The rf433 codes from my remote are also displayed correct in the info page.  
But if i setup remote433.json, it only accept one command from my rf433.  
After that it do not detect any new commands.  
without remote433.json all works correct.  
I use the json api to call diffrent presets.