# \[SOLVED\] WS2805 RGBCCT flickering on same led sextets **URL:** \ **Category:** Issues\ **Created:** [September 8, 2024, 9:38pm UTC](https://wled.discourse.group/t/solved-ws2805-rgbcct-flickering-on-same-led-sextets/12600 "2024-09-08T21:38:51Z")\ **Posts on this page:** 1\ **Showing post:** 1
**Author:** ![Tsunami](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/tsunami/32/8323_2.png) [@Tsunami](https://wled.discourse.group/u/Tsunami)\ **Post date:** [September 8, 2024, 9:38pm UTC](https://wled.discourse.group/t/solved-ws2805-rgbcct-flickering-on-same-led-sextets/12600/1 "2024-09-08T21:38:51Z")
Hi, I’m not expert but I suppose WS2805 RGBCCT is usable as WS2805 RGBCW on wled 0.15.0-b4. So my 20mt of WS2805 RGBCCT 24V are configured as WS2805 RGBCW (the only one available in the 0.15.0-b4 nightly build), but I have a flickering problem. That’s not the common flickering: it is addressed on the same LEDs… Some 6-group-led (2, 11, 21) are flickering with alternate colours and don’t turn off when I switch off the strip. I tried a large amount of configurations and the issue is always the same. I’ve changed the D line with the B line (backup) and the segments affected are shifted 1 place forward (2, 12 , 22). If I disconnect the controller, they stop changing color and remains with the color they had at the moment of the disconnection. I’ve changed both the controller and the strip, with same result… I’ve cut the strip and resorted the piece with a new one and the problem stay there. The rest of the strip works perfectly blending correctly the RGB and the 2 whites. With those tests I suppose it is a wled-side issue, so I ask if someone has suggestions that can help me. Are those the correct conditions for opening a issue on the issue tracker? Thank you! --- _[View the full topic](https://wled.discourse.group/t/solved-ws2805-rgbcct-flickering-on-same-led-sextets/12600)._