# Time & Macros: Timing Error

**URL:** <https://wled.discourse.group/t/time-macros-timing-error/3154>\
**Category:** Questions\
**Created:** [July 4, 2021, 7:38pm UTC](https://wled.discourse.group/t/time-macros-timing-error/3154 "2021-07-04T19:38:41Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Dr.P](https://avatars.discourse-cdn.com/v4/letter/d/848f3c/32.png) [@Dr.P](https://wled.discourse.group/u/Dr.P)\
**Post date:** [July 4, 2021, 7:38pm UTC](https://wled.discourse.group/t/time-macros-timing-error/3154/1 "2021-07-04T19:38:41Z")

</div>

Hello, I have been using WLED on a Dig-Quad V1 12V with WS2811 for about 5 months. When running older version of WLED (0.11) I had no issues with presets turning on and off according to the time specified in the T&M table. Now, I am running WLED v 0.12 and the lights stay on for only 60 minutes even though they are programmed to run for 4 hours. I think it is something simple I am missing. Any help would be greatly appreciated. A typical program would be to turn on preset 2 (RGB Colorful) at 20 h every day of the week and then preset 1 (Off, T=0) at 24 h every day of the week. At 20 h the lights come on and at 21 h they turn off. I am not using T=1 to turn the lights on. Thanks, Dr.P.