# Twinkleup does not reach the end of leds in 0.11.0

**URL:** <https://wled.discourse.group/t/twinkleup-does-not-reach-the-end-of-leds-in-0-11-0/1570>\
**Category:** Issues\
**Created:** [December 5, 2020, 5:18pm UTC](https://wled.discourse.group/t/twinkleup-does-not-reach-the-end-of-leds-in-0-11-0/1570 "2020-12-05T17:18:21Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![tonyno](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/tonyno/32/242_2.png) [@tonyno](https://wled.discourse.group/u/tonyno)\
**Post date:** [December 5, 2020, 5:18pm UTC](https://wled.discourse.group/t/twinkleup-does-not-reach-the-end-of-leds-in-0-11-0/1570/1 "2020-12-05T17:18:21Z")

</div>

Can someone else confirm this for me?

---

<div class="post-metadata">

**Author:** ![Modelman](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/modelman/32/416_2.png) [@Modelman](https://wled.discourse.group/u/Modelman)\
**Post date:** [December 6, 2020, 12:28am UTC](https://wled.discourse.group/t/twinkleup-does-not-reach-the-end-of-leds-in-0-11-0/1570/2 "2020-12-06T00:28:26Z")

</div>

Confirmed…Just tested Twinkleup on a 8266 module running 1m 144 LED strip an all was working ok. However after some switching between other sequences and back to Twinkleup I was able to replicate your issue. My last 5 LEDs on the strip are not functioning. I believe some issues have been reported regarding preset freeze ups on certain sequences but not sure if it’s effecting pixel count.  
I am also getting other issues related to storing and retaining settings in the Favourites menu after a cold start.

---

<div class="post-metadata">

**Author:** ![tonyno](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/tonyno/32/242_2.png) [@tonyno](https://wled.discourse.group/u/tonyno)\
**Post date:** [December 6, 2020, 12:57am UTC](https://wled.discourse.group/t/twinkleup-does-not-reach-the-end-of-leds-in-0-11-0/1570/3 "2020-12-06T00:57:01Z")

</div>

I do use ESP32s but I’m not seeing other problems.

---

<div class="post-metadata">

**Author:** ![Modelman](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/modelman/32/416_2.png) [@Modelman](https://wled.discourse.group/u/Modelman)\
**Post date:** [December 6, 2020, 12:59am UTC](https://wled.discourse.group/t/twinkleup-does-not-reach-the-end-of-leds-in-0-11-0/1570/4 "2020-12-06T00:59:27Z")

</div>

Did OTA update so that might be the issue. Probably best to completely erase and flash via USB.

---

<div class="post-metadata">

**Author:** ![Modelman](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/modelman/32/416_2.png) [@Modelman](https://wled.discourse.group/u/Modelman)\
**Post date:** [December 6, 2020, 1:06am UTC](https://wled.discourse.group/t/twinkleup-does-not-reach-the-end-of-leds-in-0-11-0/1570/5 "2020-12-06T01:06:21Z")

</div>

Fixed, just move intensity slider close to max.