# Using Dual Channel on Dig-Uno

**URL:** <https://wled.discourse.group/t/using-dual-channel-on-dig-uno/6402>\
**Category:** Hardware\
**Created:** [November 18, 2022, 9:50pm UTC](https://wled.discourse.group/t/using-dual-channel-on-dig-uno/6402 "2022-11-18T21:50:04Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![s.groen](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/s.groen/32/1984_2.png) [@s.groen](https://wled.discourse.group/u/s.groen)\
**Post date:** [November 18, 2022, 9:50pm UTC](https://wled.discourse.group/t/using-dual-channel-on-dig-uno/6402/1 "2022-11-18T21:50:04Z")

</div>

Will the QuinLED-Dig-Uno w Dual Channel play two different playlists “simultaneously” on two separate LED strips?

---

<div class="post-metadata">

**Author:** ![blazoncek](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/blazoncek/32/1886_2.png) [@blazoncek](https://wled.discourse.group/u/blazoncek)\
**Post date:** [November 19, 2022, 1:04pm UTC](https://wled.discourse.group/t/using-dual-channel-on-dig-uno/6402/2 "2022-11-19T13:04:38Z")

</div>

No, but this is not limited to Dig-Uno.  
WLED cannot play 2 playlists at the same time.

Still, I think you interpreted the “playlist” wrong. Most likely you meant “different effect on each strip”. The answer to this is yes, you can set up each strip as a segment and have it controlled separately.

---

<div class="post-metadata">

**Author:** ![s.groen](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/s.groen/32/1984_2.png) [@s.groen](https://wled.discourse.group/u/s.groen)\
**Post date:** [November 19, 2022, 9:15pm UTC](https://wled.discourse.group/t/using-dual-channel-on-dig-uno/6402/3 "2022-11-19T21:15:49Z")

</div>

Yes, you are correct. Thanks for your precise answer.

---

<div class="post-metadata">

**Author:** ![AVM](https://avatars.discourse-cdn.com/v4/letter/a/ba9def/32.png) [@AVM](https://wled.discourse.group/u/AVM)\
**Post date:** [February 20, 2026, 12:25am UTC](https://wled.discourse.group/t/using-dual-channel-on-dig-uno/6402/4 "2026-02-20T00:25:53Z")

</div>

WLED is very user-friendly, but it requires more than 3200 LEDs for illuminated signs. I haven’t been able to get Xlight to read my SP controller. What software would be a good option for having different channels and effects without being too complicated? It’s only for LED strips, not for making displays. Thanks.