# Wanting to upgrade from 0.14 to 0.14.1 - update failed, check your file and retry **URL:** \ **Category:** Issues\ **Created:** [February 25, 2024, 12:56am UTC](https://wled.discourse.group/t/wanting-to-upgrade-from-0-14-to-0-14-1-update-failed-check-your-file-and-retry/11209 "2024-02-25T00:56:52Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![LD9K](https://avatars.discourse-cdn.com/v4/letter/l/f6c823/32.png) [@LD9K](https://wled.discourse.group/u/LD9K)\ **Post date:** [February 25, 2024, 12:56am UTC](https://wled.discourse.group/t/wanting-to-upgrade-from-0-14-to-0-14-1-update-failed-check-your-file-and-retry/11209/1 "2024-02-25T00:56:53Z")
I am currently running an “unsupported” board with WLED - ESP8266 (ESP01M board, something like the image below). I managed to flash WLED on it by using the WLED install web page. I use home assistant to control it. So far everything has been working great for the past few months. But I want to do a firmware update - Home assistant was reporting there’s an update out. It currently reports ```auto Installed version: WLED 0.14.0 (esp8266 build 2310130) ``` So I downloaded `WLED_0.14.1_ESP8266` from gitbub and tried to update it, however I’m getting > ## Update failed! > > Please check your file and retry! Any ideas what could be causing this, and how I can get it updated? ![image](https://global.discourse-cdn.com/free1/uploads/wled/original/2X/3/37f7bc26fc807e3dba774c280c314e6c8c3712de.jpeg) ---
**Author:** ![srg74](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/srg74/32/3018_2.png) [@srg74](https://wled.discourse.group/u/srg74)\ **Post date:** [February 25, 2024, 7:35pm UTC](https://wled.discourse.group/t/wanting-to-upgrade-from-0-14-to-0-14-1-update-failed-check-your-file-and-retry/11209/2 "2024-02-25T19:35:01Z")
You need special binary for ESP8285 chip and 1M memory