# Wled address single LED
**URL:** https://wled.discourse.group/t/wled-address-single-led/4063
**Category:** Questions
**Created:** [November 18, 2021, 10:38am UTC](https://wled.discourse.group/t/wled-address-single-led/4063 "2021-11-18T10:38:46Z")
**Posts on this page:** 4
**Page:** 1
### Author:  [@sawo](https://wled.discourse.group/u/sawo)
#### Post date: [November 18, 2021, 10:38am UTC](https://wled.discourse.group/t/wled-address-single-led/4063/1 "2021-11-18T10:38:46Z")
Hi there,
I am a absolute beginner with wled, but I hope you can help me with a question.
In my handrail (stairs) are 2x 5m WS2812B stripes installed, which work perfectly.
Now I would like to just turn on 1 LED, which is right above a stair during night.
for e.x lets say I want to turn on LED #1 #20 #35 #40 #50 #55 #60 it that possible to address each single LED instead of a segment?
thx
sawo
---
### Author:  [@divsys](https://wled.discourse.group/u/divsys)
#### Post date: [November 18, 2021, 11:22am UTC](https://wled.discourse.group/t/wled-address-single-led/4063/2 "2021-11-18T11:22:30Z")
You can create a preset containing 7 segments with only 1 LED in each.
So segment 0 would Start at 0 and Stop at 1, while segment 4 would Start at 49 and Stop at 50.
Remember - segments and LED positions are _ **0 based** _.
---
### Author:  [@sawo](https://wled.discourse.group/u/sawo)
#### Post date: [November 18, 2021, 11:40am UTC](https://wled.discourse.group/t/wled-address-single-led/4063/3 "2021-11-18T11:40:57Z")
> [@divsys](#):
>
> 1
thats sounds good, will try it.
Thx a lot for your answer
---
### Author:  [@woehaa](https://wled.discourse.group/u/woehaa)
#### Post date: [November 18, 2021, 7:36pm UTC](https://wled.discourse.group/t/wled-address-single-led/4063/4 "2021-11-18T19:36:46Z")
Or if the spacing is the same between the leds you want to turn on, use a single segment but set spacing to e.g. 40 or 45