# Wled config whithout wifi

**URL:** <https://wled.discourse.group/t/wled-config-whithout-wifi/11832>\
**Category:** Questions\
**Created:** [May 13, 2024, 9:50pm UTC](https://wled.discourse.group/t/wled-config-whithout-wifi/11832 "2024-05-13T21:50:38Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Alexh](https://avatars.discourse-cdn.com/v4/letter/a/6f9a4e/32.png) [@Alexh](https://wled.discourse.group/u/Alexh)\
**Post date:** [May 13, 2024, 9:50pm UTC](https://wled.discourse.group/t/wled-config-whithout-wifi/11832/1 "2024-05-13T21:50:38Z")

</div>

Hi, im new to wled and whant to create a controller for the led´s in my ARGB fans in my pc.  
i would configure the wled software without using wifi or the wled AP.  
is there a posability to do this with usb ? i would connect the esp32 direct to an internal usb2 port on my motherboard.  
is there a way to call the config over usb ?  
thank you and sorry for my bad english

---

<div class="post-metadata">

**Author:** ![8adger](https://avatars.discourse-cdn.com/v4/letter/8/ec9cab/32.png) [@8adger](https://wled.discourse.group/u/8adger)\
**Post date:** [May 14, 2024, 2:40am UTC](https://wled.discourse.group/t/wled-config-whithout-wifi/11832/2 "2024-05-14T02:40:26Z")

</div>

This what I am using to not do it over wifi, but I don’t think it will work for what you want

> **[Wasatch Duo Controller w/WLED and Ethernet by Wasatch Pixels on Tindie](https://www.tindie.com/products/k7bbr/wasatch-duo-controller-wwled-and-ethernet/)**
>
> An ESP32 Ethernet board and level-shifting HAT to control LED pixel strings and strips