# Ws2805 Moonmodule

**URL:** <https://wled.discourse.group/t/ws2805-moonmodule/15196>\
**Category:** Uncategorized\
**Created:** [February 28, 2026, 6:38pm UTC](https://wled.discourse.group/t/ws2805-moonmodule/15196 "2026-02-28T18:38:29Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Grisu84](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/grisu84/32/10330_2.png) [@Grisu84](https://wled.discourse.group/u/Grisu84)\
**Post date:** [February 28, 2026, 6:38pm UTC](https://wled.discourse.group/t/ws2805-moonmodule/15196/1 "2026-02-28T18:38:29Z")

</div>

Hello,

I wan’t to use WS2805 24V in Moonmodule.

I can’t find it in the LED config.

Please Help.

Udo

---

<div class="post-metadata">

**Author:** ![dedehai](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/dedehai/32/7265_2.png) [@dedehai](https://wled.discourse.group/u/dedehai)\
**Post date:** [March 2, 2026, 6:44am UTC](https://wled.discourse.group/t/ws2805-moonmodule/15196/2 "2026-03-02T06:44:33Z")

</div>

if it’s not supported, ask for that feature on MM github. Any specific reason you need MM instead of using vanilla?

---

<div class="post-metadata">

**Author:** ![Grisu84](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/grisu84/32/10330_2.png) [@Grisu84](https://wled.discourse.group/u/Grisu84)\
**Post date:** [March 2, 2026, 7:29am UTC](https://wled.discourse.group/t/ws2805-moonmodule/15196/3 "2026-03-02T07:29:46Z")

</div>

Hello,

i wan’t to use custom effects.

Ist there a way to do this with the original Release?

Best regards

Udo

---

<div class="post-metadata">

**Author:** ![dedehai](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/dedehai/32/7265_2.png) [@dedehai](https://wled.discourse.group/u/dedehai)\
**Post date:** [March 2, 2026, 8:03am UTC](https://wled.discourse.group/t/ws2805-moonmodule/15196/4 "2026-03-02T08:03:25Z")

</div>

you mean arti-fx? that is only on MM.

---

<div class="post-metadata">

**Author:** ![Superluminal](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/superluminal/32/5477_2.png) [@Superluminal](https://wled.discourse.group/u/Superluminal)\
**Post date:** [March 2, 2026, 8:11am UTC](https://wled.discourse.group/t/ws2805-moonmodule/15196/5 "2026-03-02T08:11:49Z")

</div>

WS2805 runs with WLED. But only with controllers with 5V logiclevel. The bare ESP evaluationboards works with 3,3V only. You need a board with levelshifter outside. What is special by “moonmodule”?  
if this modules comunicate with the bare signals from WS2805 IC, thats crap! In past i’d relize similar project with WS2814 (rgbw pixel) I’d boost the serial data signals with RS485  
[https://wled.discourse.group/t/ws2814-based-power-led-pixel/9869](https://wled.discourse.group/t/ws2814-based-power-led-pixel/9869)  
😉

---

<div class="post-metadata">

**Author:** ![dedehai](https://yyz2.discourse-cdn.com/free1/user_avatar/wled.discourse.group/dedehai/32/7265_2.png) [@dedehai](https://wled.discourse.group/u/dedehai)\
**Post date:** [March 2, 2026, 9:51am UTC](https://wled.discourse.group/t/ws2805-moonmodule/15196/6 "2026-03-02T09:51:01Z")

</div>

this is completely off topic…