Hi, I’m working on a project using an ESP8266 with wled installed on it, I’m using an led ring with 24 leds on it and have been having fun messing around with them but now I have a project I need it for. I’m basically making a bike back light as I don’t have one and I thought it would be fun to make…

oh yeah, and this is the code! #include <Adafruit_NeoPixel.h> #define LED_PIN 11 // Digital pin connected to the LED ring #define LED_COUNT 24 // Number of LEDs in the LED ring #define RIGHT_BUTTON_PIN 12 // Pin for the right button #define LEFT_BUTTON_PIN 13 // Pin for the left button A…

this very simple Progeamming here is a small Example WS2812b fastled - General Electronics - Arduino Forum You do not need segments in ARDUINO its the main loop() calls the subprogramm in sensor or whatever behavior like if levelsens < 100{left()} this then sets the LED’s like void left() { fo…

that looks very promising, thank you, this is how I was coding it before #include <FastLED.h> #define LED_PIN 9 #define NUM_LEDS 24 CRGB leds[NUM_LEDS]; void setup() { FastLED.addLeds<WS2812, LED_PIN, GRB>(leds, NUM_LEDS); //step 1 leds[0] = CRGB(0,0,255); FastLED.show(); leds[23] = CRGB(0…

btw, how would I do that with 2 buttons for left and right and a flip switch for brakes (I’m guessing I could just use the same code from the buttons for the switch)

ok so you can do it You can make this a quite cool thing using your smartphone sensors VIA a HC-05 to your Arduino If you are like a Semi pro you can do a APP that graps the Speed and level sensor of yopur phone and send it to the Arduino that acts on this sensors The app shoudt also got the res…

so what I have (and will probably be using) is a LOT of arduino boards (specificly arduino uno r3), an ESP32 DEVKIT V1, an ESP8266, two buttons (I’ll probably just use one), a flip switch, a 24 bit led ring, and a LOT of wires, oh and like 6 different ways to power it.

oh yeah, and I know how to solder and have the stuff for that

ok, I think I might be doing something wrong, I’m kinda new to custom voids… #include <Adafruit_NeoPixel.h> #define PIN 9 // input pin Neopixel is attached to #define NUMPIXELS 24 // number of neopixels in strip Adafruit_NeoPixel pixels = Adafruit_NeoPixel(NUMPIXELS, PIN, NEO_GRB + NEO_KHZ800)…

Changed the code a bit but the buttons and switch aren’t working #include <Adafruit_NeoPixel.h> #define PIN 9 // input pin Neopixel is attached to #define NUMPIXELS 24 // number of neopixels in strip Adafruit_NeoPixel pixels = Adafruit_NeoPixel(NUMPIXELS, PIN, NEO_GRB + NEO_KHZ800); const int…

@mr_chef1 TRY this ARATION the LED Ring is on PIN4 in IARDUINO DE Monitor Tyoe L for Left blink R… or S blink Stop B for break #include <Adafruit_NeoPixel.h> #ifdef __AVR__ #include <avr/power.h> #endif // Which pin on the Arduino is connected to the NeoPixels? #define PIN 4 // Ho…

I always seem to have problems with AVR code [image]

ESP8266 wled with 24 bit LED ring help

Questions

mr_chef1 April 22, 2024, 6:08pm 27

Thank you, sounds fun!

Turning signals for a vehicle

Topic		Replies	Views
Turn Signals - Multiple switch inputs solved! Usermods	55	6529	June 2, 2025
Segments - Chase/Travel? Questions	17	2239	December 22, 2021
Fully fledged Staircase implementation Projects	209	43950	January 5, 2026
Will it WLED? Govee H7050 Allure Ground Lights — Complete Reverse Engineering & Working Config Questions	18	232	April 23, 2026
LEDs flickering while using brightness Issues	65	7768	March 3, 2020

ESP8266 wled with 24 bit LED ring help

Related topics