Hi all, I have searching all over for a simple overview of how to implement a momentary button to cycle through presets and could not find any (may be due to lack of proper “google skillz”) So this is an attempt to list what I did to make it work and also … some issues I noticed of which I hope Air…

P1 is the lower limit and P2 is the upper limit.

Hi! I would recommend that you change preset 20 to PL=~&P1=1&P2=5. This sets the range of the cycle to 1-5. In your case it is not strictly required, since 1-5 is the default, but if you wanted to cycle through more (or less) presets, it would be required. I’m not sure that I understand the second…

Awesome. I’ll definitely try that. And about changing the button default, I’ll ask my brother to look at the code. It should be right up his alley

[image] Aircoookie: PL=~&P1=1&P2=5 So I tried your suggestion and (of course) it works. But how does this line work exactly? I can’t figure that one out. I kinow that when I change the “5” to “8” it continues until preset 8, but what is the logic behind the PL=~&P1=1&P2= …??

https://kno.wled.ge/interfaces/http-api/

It is getting more clear to me. I didn’t get the “first cycle preset” description and that you can add more instructions. Thanks. However, I am probably asking more of these n00b-like question :slight_smile:

Hello, could you pass me the diagram of how you have the button connected to the wemos d1 mini? I do it according to your descriptions and it doesn’t work for me. Many thanks in advance.

https://kno.wled.ge/features/macros/

You have almost the same setup that I have in my bedroom :slight_smile: But I have a problem with button 1. If I program the long press of button 1 to the preset &T=2. Then the Light goes on and off and on an off while holding the button. Actually as long as I hold the button. If I do the same com…

Button 0 has some special handling and if you press it for more than 6s it will open AP, more than 12s it will factory reset. Button 1 will ramp brightness by default.

[image] blazoncek: Button 0 has some special handling and if you press it for more than 6s it will open AP, more than 12s it will factory reset. @blazoncek Is this 6/12s thing only active if long button press isn’t configured otherwise? Or should I better switch to Button > 0 to avoid accide…

WLED v0.13.0 button implementation example (+ some issues)

Projects

blazoncek April 17, 2023, 8:40pm 14

Topic		Replies	Views
Looking for help with button actions Questions	10	4039	August 19, 2021
Physical button Questions	21	1884	May 22, 2023
Using pushbutton to change presets	32	6486	May 10, 2022
Setting push button Questions	13	1994	May 9, 2022
Real momentary button Questions	5	303	January 27, 2024

WLED v0.13.0 button implementation example (+ some issues)

Related topics