Controlling single white 5050 LEDs on RGB Ws2811 in non Standard config

Questions
1

Hi guys,

for one of my projects i would like to do the following. Use Ws2811 Ic in 12 V config. It is connected to 5050 LEDs with 3 internal white LED Chips. I dont want to be able to Control the 3 internal leds with more then 255 steps. Means. I will connect the 3 internal leds in series and Connect one full 5050 Led to R, one to G, one to B. Means i have 3 dedicated 12V Pixels per Ws2811.

Is this possible to configure in Wled or what do i have to modify and compile to make it possible?

Its Just that 1sr ws2811 r is one Led White, g is one Led White, b is one Led white etc etc.

2

so classic 3 white leds per chip? that is supported.

3

The ws2811 12V White stripes from China are routed the following: each 5050 Led contains 3 chips, A B and C, they Connect 3 As, 3Bs 3 Cs. Thats why 3 leds can only bei controlled as one single Pixel. I will Connect ABC per LED in series to reach 12 V. So each Led becomes one white 12 V Pixel.

4

I don’t get it but if its not the standard layout, you need to change the code to make that possible to control easily.