TM1814 RGBW strip colour channels inverted

Questions
1

I have a 2 x RGBW TM1814 strips connected to a QuinLED DigQuad.
I cannot seem to get the colours in the rght order.
Doesn’t seem to matter what the configuration is set to, one colour is always swappd with white.

Is there a setting I am missing?

2

This is an example that may help you

Screenshot_2022-10-29-09-20-21-280_com.aircoookie.WLED
Screenshot_2022-10-29-09-20-21-280_com.aircoookie.WLED613×752 17.1 KB

Screenshot_2022-10-29-09-20-38-595_com.aircoookie.WLED
Screenshot_2022-10-29-09-20-38-595_com.aircoookie.WLED642×515 15.9 KB

3

What version are you running?
The more recent ones have a specific extra setting for that protocol to allow W to be swapped with one of the RGB colours. That was specifically for this issue.

4

I have tried WLED 0.13.0-b7 and 0.13.3.
Do you know where that setting is?
Can’t see it on the LED prefernces page:

Screenshot_20221030_022347
Screenshot_20221030_022347480×727 98.2 KB

5

You might have to bump up to one of the v0.14 revs.
On mine, the Color Order: selection is one line down and the Swap: selection is right beside it.
Automatic with RGBW protocols.