Hello I’m new to WLED but I did some ESP32 projects with ESP-IDF in the past. I want to run WLED on an ESP32-S3-WROOM-1 N16R8. It’s a ESP32-S3-DevKitC-1 board. As I didn’t find a binary release, I did download the source code from git. I didn’t do any changes in the code. All I did is to set the ta…

The router should be fine. Everything else works, also other ESP32 devices running esphome. I turned on debug but there is not a lot I can see. It looks like this: Local time: 14:05 ---DEBUG INFO--- Runtime: 390379 Unix time: 1765029902,694 Free heap: 226120 PSRAM: 8112kB/8189kB TX power: 78/78 Wi…

it shows that it serves the UI, so all working on controller side. what is the browser error?

Hi No error at all, it gets stuck while loading. I tested different browers (firefox, chrome) on different devices.

if it serves the page but the page wont load and wont show any dev console errors in the browser, it means it does not get any data through. try changing wifi channels on the router to 5 or 6.

I am having the exact same problem with the same chip. It will run my pixels but won’t put out an AP signal to my home WiFi.

I was able to solve it but I don’t understand how. I tried everything, every setting with my AP. I also used a raspberry 4 in AP mode. Than suddenly it worked with my original AP and settings. It worked for both devices I tested, ESP32 and ESP32-S3. I wish I would know the reason

Web UI not loading

Questions

katagia December 6, 2025, 7:12am 3

Same Issue.

I also tried several precompiled versions I found.

Best case they have the same issue. Worst case, wifi is not working at all.

Topic		Replies	Views
Stuck on Loading UI Questions	0	1807	January 18, 2021
WLED Web Interface Unreachable Issues	8	1628	October 16, 2024
Newbie help please! Questions	8	148	December 3, 2024
I install wled 15 on esp32-s3n16r8, but the access point does not appear Issues	1	140	June 26, 2025
ESP32 loads properly, but WLED-AP does not transfer to WiFi Issues	21	8271	June 26, 2025

Web UI not loading

Related topics