Ive been trying to flash wled onto an esp32 and every time i try it says no com connected but is shows up in device manager, ive tried 5 different cables, same issue when tried on my laptop and my desktop, ive also tried following guides but they don’t show how to flash the esp32 or anything, what should i do
Reboot your PC if you did not and try again from this site WLED installation (wled-install.github.io) . Once you get the error take a screen shot of both device manager and the installer site error . If you have any other MCU that you tested on the same PC then could give a clue
I got it working, all it took was using my dads computer