Hello, I am trying to setup moonmodules on an esp32-c3 supermini and notice that the release on the ‘install wled’ page comes preinstalled with a couple usermods. Namely the Four Line Display and Rotary Encoder. Im planning on choosing the ‘esp32-c3’ option under the ‘moonmod nightly build 0.14.1 b31.38’ from that page for (what i hope to be) a simple, newb friendly install.
My question is, what pins am i to wire them to? There doesnt seem to be any guide on this aspect of their installation. I would like to install both the four line display and the rotary encoder. But i need to know which pins the installation is expecting.
And while were at it i need the scoop on wiring in the digital mic (INMP441 Type). Which pins to send that to?
As a separate question, would These ‘T Display’ prebuilt boards OR These 'Ideaspark OLED prebuilt boards work as my solution to including the display? Would be pretty nice to have everything already installed like this. Simply wire in the encoder and strip and theyd be good to go. The pins are different on these boards though so i’d need to know the wiring for them as well…