WLED Shield Wemos D1

Hardware
1

Good day SRG74

Have ordered 20 of your boards and all the parts .PHEW expensive stuff !
I believe you used nothing but top quality parts for this build and am excited to test your creation .
Have assembled 2 of these boards and noticed the silkscreen says Di on screw terminal . Is this Do instead ?

I quite like your 3d model of this also , and noticed you used a 2 row oled . Could you give a link to the oled that you used or equal .

Thank you very much for creating this masterpiece and sharing . I really wanted a quality shield for the esp modules and you have made this happen .

Regards
Richard

2

Thank you for good words.

  1. DI match DI on strip. Technically it is a DO :slight_smile:
  2. Display is has 4 line to display. Resolution is 128X32, OLED 0.91" SSD1306 chip
    something like this 0.91 inch 128x32 I2C IIC serial white blue OLED liquid crystal display module 0.91"12832 SSD1306 LCD screen for Arduino|display module|oled lcd led displayoled lcd led - AliExpress
3

Thanks for the link and quick reply . Have ordered them and will wait for the slow boat to arrive .

Do you have suggestion on which firmware I should use on the Esp32 mini ?
I have loaded this .bin but not sure if it is the correct one to use .
v0.11.1_blazoncek_multistrip

I have a lot to learn and understand of your controllers functions and firmware workings.

cheers

4

This is beta firmware. But you can use it.