I ran many tests on different level-shifters and setups to bring a bit more light into the topic. Here are the results: [image] All tests done with ESP32 C3, my custom controller uses a 74HCT2G17. The modified I2C levelshifter use an addtional pull-up resistor to 5V on the output and according t…

Levelshifter Analysis

dedehai June 2, 2024, 5:40am 12

Here is how I modified the I2C shifter, for everyone wanting to attempt this ‘hack’:

3 Likes

Topic		Replies	Views
Issues Controlling WS2814 with ESP32 – Signal Unstable and Flickering Issues	8	147	February 27, 2025
Flickering COB LED Strip Issues	3	135	January 15, 2025
Level Shifter not necessary Hardware	3	1428	April 4, 2024
ESP32 Data Current to low Hardware	6	515	April 24, 2023
LEDs flash every few seconds Issues	7	165	July 29, 2024