Hey community, I setup my wled controller and strip for the first time yesterday it worked fine, I went to bed powered all off, started in on next day, now all the lights are off all the time. I can connect to the controller successfully but leds are all off. I tried to reset everything not working…

[image] Gledopto GL-C-618WL output issue Issues Hey I have a pretty simple setup PSU → Controller→ LED PSU: mean well lrs-100-5 Controller: Gledopto GL-C-618WL Led: SK6812 (4.15m - 249 leds, 60 leds/m) I used this controller for the power output, it should…

So you think the controller broke? I have a second one to test with it. What do you mean with relay pi config?

there was an “n” lost. relay pin can be configured in settings, if the controller has a “relay” to enable the outputs, it needs to be configured or outputs will not be powered.

WLED setup worked on next day leds not working at all

Issues

dedehai February 15, 2026, 1:55pm 2

maybe that is just bad hardware? gled are not known for great quality. could also just be relay pi configuration

Topic		Replies	Views
Total newbie, lights suddenly stopped Issues	5	224	February 10, 2024
Help plz Questions	0	73	September 28, 2025
LED turning on with disconnected controller Issues	1	367	August 13, 2023
Newbie Desperately Needs Help Issues	1	455	February 14, 2023
1st pixel green 2nd white when powering my strip Issues	6	640	March 17, 2024

WLED setup worked on next day leds not working at all

Related topics