Is it possible to mix the 2D and 1D configurations on the same set of LEDs? I have been using WLED for years but have never messed with 2D until now. I just installed three 2m strips of FCOB lights (20 addressable/m) vertically next to one another and have temporarily set them up as a 3x39 (one LED…

Found a quick dirty fix ( I am sure we can make it shorter ) Using the inspect tool firefox developer version First use the curl we used before to change the “v”:true curl -X POST http://10.0.6.21/json/cfg -H "Content-Type: application/json" -d "{"hw":{"led":{"matrix":{"mpc":1,"panels":[{"b":fal…

2d-1d-Mixed-Setup info here https://kno.wled.ge/advanced/2d-1d-Mixed-Setup/ To rotate the effects look at Transpose in the segment options

prity simple FIRST segment use the matrix AND only config the real matrix in 2D setup Then click new segment and just add to X the last LED in matrix 32x8 = 256 if you enter 256 then the segment will change to LINE 1D [2024_Wled_Xmas_display_star_matrix]

To be clear, I don’t have any real matrix in the mix here just three 2m strips running parallel to one another along the wall like this: I I I I’m hoping to save and use presets for this with it configured as a 2D matrix and as a 1D strip without having to alter the configuration after the initial …

My case is unique from this as there is no actual matrix just three strips running parallel to one another that can function as a matrix (albeit with terrible resolution) or as a 1D strip. I’m hoping to save presets with it configured one way or the other and have them actually display that way even…

then i woudt go for only 1D and use only this you can have 9 segments 3each this gives you quite nice effects

Thanks for the idea. I’ll have to play around with this and the offset to see if I can maybe replicate things more closely. I just really liked how the Tartan effect looks with the strip configured as a horizontal matrix but wanted to also use some effects with it set as a vertical matrix and a 1D …

So I was doing some more research last night thinking of different ways to accomplish this and I think it may be possible using the JSON API…? If you navigate to the [IP]/JSON page of the devicen it does show hw > led > matrix > panel > 0 > v = true/false (vertical oreitation true/false) but I have …

I strongly suspect the configuration won’t be easily updated via the API (that’s my gut not definitive). What is possible is the link between segments and their position on a matrix. Checkout start, stop, startY, and stopY in the segment description of the JSON API. That might give you some inter…

Thanks for the response! I’m back home and tinkering some more. I’ve used ChatGPT for the very first time to help ensure that I’ve formatted my JSON correctly and it worked to enable/disable MQTT via the API, but I suspect that you’re correct about the configuration being blocked from changes via t…

I honestly never played with /json/cfg so I am just testing with you . You seem to have a lot of errors in your curl even if you do not get errors in the output , if you omit the x and y then the panel will be reset to 8x8 , you also changed “panels” to “panel” and used json/settings when the …

2D and 1D Config/Presets on same LEDs

Questions

ALDIY December 19, 2024, 7:14am 16

Small video of how to revers engineer anything in ui to use with curl
hack_anyui_curl

Proposal: user scripts

Topic		Replies	Views
Combine 2d matrix and 1d led strip Questions	22	2620	September 13, 2023
WLED 0.14 DMX inconsistency Questions	11	814	March 17, 2023
Are there any pov mods to make a 1d string act like 2d? Questions	1	66	September 20, 2024
2D Matrix with multiple LED outputs	4	1941	May 9, 2023
XLight, WLED and Matrix in one port Questions	37	4258	November 26, 2024

2D and 1D Config/Presets on same LEDs

Related topics