So here is the scenario, I have a small light show I setup for local bands and events. I use two different controllers right now, cheauvet obey70, American, DJ my DMXGO, so I’m currently running two universes. I have built multiple tube lights that i want to integrate into my show. Right now I am just using an old phone to control the LED two lights. So technically, that would make it a third universe. I only have two hands. I’ve purchased a CQRobot DMX Shield MAX485, which I should’ve looked at the code 1st, because it does not appear that WLED supports that shield, either way my goal is to control WLED with a DMX controller. I am using an ESP 32 for the controller of the LEDs. I am willing to buy a different shield, but I figured I should reach out to the community and see if anybody can point me in the right direction. Thanks in advance.