Hi everyone!
I have been reading through a lot of the dicussions as there are a number of people with a similar issue but mine is slightly difference so I am hoping someone could shed some light on it for me.
I am running WS2815 in a media wall setup where I have 6 relatively small strips within sections of the wall.
From the photo you will see, the strips run from bottom to top box on the right then move over to the left of the 3 vertical strips across to the right. I am getting frequent random colour change but only on the 3 vertical strips and the horizontal box strips are fine.
I am using a 240v to 12v transformer and a 12v to 5v buck converter to power the ESP32. I have a level shifter I2C due to the initial 1-2n run to the first horizontal strip from where the components are located.
it just seems really strange that it is only a certain part of the run that is affected and not all of them but I am relatively new to the LED scene so hoping that the experience found in here may help me to find a way to rectify the issue.
I would upload a video of the flash but not sure how!
