Howdy, Just picked up a interesting BTF strip that is a WS2811 addressable CCT strip, running at 24V. It’s an interesting COB arrangement, giving a very “smooth” light (vs typical “bright LED dots”) by piling a ton of little LEDs next to each other. The COB strip has a mix of 3000K and 6000K whit…

Yep - you can either disable it or set the actual power supply limit in the config to match your PS. I usually disable it myself as I know I’ve sized things properly, but if you undersize a power supply and want to protect things, it’s useful. Glad it’s working!

Thanks for the quick help! Any other tips on best to configure this to appear correctly as a CCT light to homeassisstant, for example? @blazoncek mentioned there should be better support in b2+, I’m on b3 (today’s nightly) and there doesnt seem to be any additional support. There does appear to be…

HA does not support WLED with CCT. Contact HA team to implement support.

Hey do you have a link to your ESP32 module?

For me WLED with a WS2811 24V strip works however i have to set up WS281x GRB and therefore i have the whole color palette and not just the color temperature. I think this also results that in HomeAssistant i have to select an Color instead of being able to select a color temperature.

Hi Everyone Totally new to this topic, please be gentle. My ledstrip : https://www.amazon.nl/-/en/dp/B0BWTQWPV4?ref=ppx_yo2ov_dt_b_product_details&th=1 My Esp32 controller : https://www.amazon.com/Teyleten-Robot-ESP-WROOM-32-Development-Microcontroller/dp/B08246MCL5?th=1 I plan to power the board…

Those are analog (dumb) LED strips and can not be directly controlled by WLED w/out other hardware: Compatible LED strips - WLED Project

Thank you Jinx. The reason i posted here is that the OP mentioned using WLED with this product from BTF and mentioned he had success getting WLED to work. Maybe there were other circuitry involved like you suggested. Since I wanted to use this for kitchen lighting only, is it safe to install it wi…

You should be ok. The specs listed for that 5m strip say 14watts so that’s like 1.2a @ 12v. They will just be full brightness without a dimming controller.

Hi Guys, can anyone share his config file to control BTF-LIGHTING FCOB COB Addressable CCT WS2811 with WLED (WS2811 white)? I’m looking to get only the white temp slider in the UI. Thanks!

WLED and WS2811 CCT COB strip

Hardware

rejbbc December 2, 2023, 5:57pm 29

Same workaround on my side

Topic		Replies	Views
Are WS2814 24v RGBW LED Strips compatible with WLED?	44	20306	January 22, 2024
WS2811 COB 24V, 2023 strip works but 2024 strips wont	37	873	June 30, 2025
Segments - Chase/Travel? Questions	17	2224	December 22, 2021
Add Support for FW1906 (NOT the same as TM1906) [enhancement] Enhancements	33	1829	October 25, 2024
Cant get my project running Issues	8	434	November 19, 2023

WLED and WS2811 CCT COB strip

Related topics