Hello all,
I have an ESP based controller and connected 2 LED stripes to different HW outputs. Each stripe is 120 LEDs each LED RGB → 360 DMX channels each.
Now I want to use QLC+ to control each stripe via E1.31 as a seperate segement. E.g. Stripe 1 in Universe 1 and Stripe 2 in Universe 2. How to configure the sync settings in WLED?
It works fine when I put the 2 stripes (partially) in one DMX Universe, but due to the fact that 1 Universe only has 512 channels both stripes do not fit in one universe.
Best regards
Joachim