Four 32*8 panels stacked as 32*32

Questions
1

I am trying to get the above working as one 32*32.

I followed this thread to get 2 32*8 panels working.
Two 8x32 Matrix Panels Stacked as 16x32 - Questions - WLED
Works a peach thanks.

I have added a further 2 panels in vertical mode.
I have tried various combinations an i cannot get it, unsure about segments, just been working on the 2D matrix combination, i dont know where i’m going wrong.
Using a Dig-Uno with the latest Wled.

Any advice guys

TIA Guys

Spats

2

I know this is old, but I was having similar issues with my 5 8 x 32 panels. This is what I came up with that works. First make sure you have the LEDs set up:

image
image796×1071 51.6 KB

Then set up the 2D configuration. Notice the offsets. The correct positioning is essential:

image
image623×1281 32.1 KB

This is what it looks like irl at the moment. I’m still trying to figure out what to mount them in, and how:

IMG_4593
IMG_45931920×2560 805 KB

3

very cool setup
people will love this

THERE are cheep READY made Standard industrial panmel at quite a low price
64x54 at 15USD with spacing from P2 to P10

look at the Manufacture store at ALI https://de.aliexpress.com/store/1102861088
TOP Bar Products LED Modules /Indoor outdoor

4

Thanks. I’m not seeing the panels you wrote about there. Do you have the direct link?

5

@Daro66 this shop got all sorts of led panels
so there is no direct link posible as you know at ALI
search your way from PRODUCTS

i personly like the “Garbitch” worn out 1meter stripes solderd most are 50cm
at 1,5USD per meter with plugs on both sidrs
so very easy to build without soldering very large displays
on very low Cost 3feet/1meter Letter and graph display at lower then 10USD