kilrah
October 16, 2023, 4:27pm
14
Haven’t had a need for that, Ethernet is disabled by default anyway until you go select the ETH01 mode.
You might have run into the unreliable boot issue.
Mine are 1.4 and I’ve had the same problem. Solved by a 1uf ceramic cap between EN and GND for me.
[IMG_20231008_233410]
Before trying WLED on them I’ve used some to run completely different firmware I’ve written and now I know that the couple times where I didn’t know why I had no response were probably the same issue, gonna have to mod them too.
Took some time to find out since the first one I used with WLED pretty much booted 100% as long as it was physically plugged into my desk’s ethern…