SK6812 LED RGBW and wled

Hardware
1

hi
I am new in WLED. I already test a simple 5V led strip ws281x
I want now to be sure that i can manage 24v LED RGBW sk6812

please help me to understand how to interface wled wemos or wled esp32 to a 24v LED RGBW sk6812 led strip.
Because when i log to wled server, if i choose SK6812 RGBW .
there is only one field GPIO (so only one cable) but when i look at the led strip i can see 5 Wires :
-G
-R
-B
-W
-Gnd
-24V

Example of led strip SK6812

https://www.led24.fr/bande-led-rgbw-5m-84-leds-p-m-24v-ip68.html?source=googlebase&gclid=Cj0KCQjw8NilBhDOARIsAHzpbLDwsQ0oaO1gYLBfqt7AureU8aY-9PAcO5sQEyKUWORH0h-vuvsj19QaApekEALw_wcB#product-images-2

For Gnd and 24V i can easily understand how to wire these two but what about G,R,B and W ?
Thanks for your help

2

That is not an SK6812 RGBW strip.
That’s an analogue strip with R,G,B,W LEDs, you can only set the colour/brightness for the whole strip not individual LEDs.

3

analog ok and is this one compatible with WLED ?

https://www.superlightingled.com/ucs2904-rgbw-60ledsm-dc24v-10mmwide-digital-intelligent-addressable-led-strip-lights-5m164ft-per-roll-p-2403.html

thx