Howdy.
I have an ESP8266 board with a fresh copy of WLED 0.12.0 flashed onto it and connected to my WiFi network. I have three wires soldered onto the GND, DIN, and 5V (no judgement on my poor soldering skills!) and connected to the GND, D4, and Vin on the board respectively of four NeoPixel 60 LED 1/4 Rings.
When the board boots up, it defaults to Pin 4 in the LED output settings, but only the first LED is lit.
If I fiddle with the Pin settings, I can get some weird patterns to show up, but it’s supposed to be just solid orange!
What am I missing?
